How to use oxygen bleach

Why do you need oxygen bleach?

Oxygen bleaches are made from sodium percarbonate. When this substance comes into contact with water, a chemical reaction occurs with the active release of oxygen. A lot of bubbles “infiltrate” the contaminants and seem to push them out.

Unlike chlorine-containing bleaches, oxygen bleaches are not as aggressive, so their range of applications is quite wide. With these products you can safely remove stains from both white and colored fabrics, remove old grease and carbon deposits from dishes and kitchen utensils, wash plumbing fixtures, furniture, tiles and others. surfaces. This product also enhances the effect of other detergents (for example, washing powders), helps get rid of fungus, eliminates unpleasant odors, and also clears blockages in pipes.

Sodium percarbonate bleaches work in lukewarm water. But as the temperature of the liquid increases, the product becomes more effective due to the more active release of oxygen.

Things to remember when using oxygen bleach

• Despite the versatility of the product, it cannot clean all materials. Do not use oxygen bleach to clean items made from natural or artificial leather, suede, nubuck, wool, silk, copper, aluminum, as well as things filled with down and feathers.
• The concentration of sodium percarbonate and other excipients in bleach may vary depending on the manufacturer. Therefore, read the instructions carefully and use the product in the recommended dosage.
• If you are unsure whether a product will work for a particular product, do a test. Try cleaning a small area of ​​the item with oxygen bleach and see the effect.
• Before using bleach on clothes and linen, carefully read the information on product labels. Follow the manufacturer's recommendations and do not use too hot water when washing or soaking to avoid damaging the fabric.

How to use oxygen bleach

1. Machine washable

Fill the machine compartment with the required amount of washing powder or gel. Add 1 tablespoon of oxygen bleach to the product (for removing complex stains or whitening, the portion can be doubled). Select the mode and temperature that suits you type of laundry, and run it.

If you are using a prewash cycle, add 2 to 4 tablespoons of oxygen bleach to the prewash compartment (usually marked with an I). Add the required dose of washing powder or gel and 1 tablespoon of product to the main tray (II). Set the appropriate mode and temperature and wash the items.

2. For hand wash

Pour water into the basin. Its temperature should be suitable for the type of fabric. Dilute the required amount of washing powder or gel in the liquid. Add oxygen bleach. You will need from 1 to 5 tablespoons per 10 liters of water, depending on the complexity of the contaminants.

Soak things for half an hour, then wash and rinse thoroughly in cool water to remove any remaining detergent.

3. For soaking clothes and linen

This option is also suitable for colored clothes or items made of delicate fabrics that can only be washed in cold water.

Pour 5 liters of water at a suitable temperature into a basin. Dissolve 2-4 tablespoons of oxygen bleach. Immerse your laundry in the mixture and soak it for at least an hour. Too dirty items can be left in the solution overnight.

Inspect things periodically. Once the stains are gone, remove the laundry from the basin and rinse thoroughly under cool running water to remove any remaining product.

4. For spot removal of stains

Mix oxygen bleach with a small amount of warm water until it becomes a thick paste.

Apply the mixture to the stain and leave for 10-30 minutes.

Rub the contaminated area with your hands or a brush. Then wash the item using powder or simply rinse under cold running water.

5. For cleaning carpets and upholstery

Pour 1 tablespoon of oxygen bleach into 250 ml of boiling water. Wait for the product to enter into a chemical reaction with the active release of foam. Apply the solution to the contaminated area carpet or furniture and scrub with a brush. If necessary, repeat the action until the stains disappear completely.

Remove any remaining bleach using a damp cloth.

6. For cleaning dishes and other kitchen utensils

In one go you can wash off grease and other pollution many different things, such as frying pans, lids, mugs, forks and knives. Therefore, take a large, deep basin to fit as many utensils as possible.

Pour boiling water into the container and add oxygen bleach (1½–2 tablespoons per 1 liter). Place dishes and cutlery in the liquid so that they are completely covered with the solution. If necessary, add boiling water and product.

Leave the items to soak until the stains are completely gone. On average, this can take from 15 to 60 minutes. Clean any remaining stains with a sponge or brush. Then wash the utensils under running water using dish soap.

7. For washing floors, walls, window sills and other surfaces

Dissolve 1½–2 tablespoons of oxygen bleach in 1 liter of boiling water. Let the mixture cool to about 40 degrees. Apply the solution to surfaces for 10–15 minutes and then rinse off with a damp cloth.

If you need to get rid of complex contaminants, such as plaque and fungus, tiles, prepare a thick paste from oxygen bleach and a small amount of hot water. Apply the resulting paste to the surface and leave for 15-20 minutes. Then, if necessary, scrub with a brush and rinse off any remaining product with a damp sponge.

8. For clearing clogs in the sink and bathtub

Pour 2 tablespoons of oxygen bleach into the drain hole. Slowly pour 500 ml of boiling water into it.

Wait 30 minutes for the product to work and dissolve blockage. After this, run cold water for 1 minute and rinse any remaining bleach from the pipe.