15 locksmith tools and accessories for all occasions
Purchases / / January 05, 2021
1. Scriber
The first tool for marking workpieces. Made in the form of a ballpoint pen with a clip for easy carrying in a pocket. The tungsten tip leaves a fine, highly visible line on steel and glass, not to mention softer materials like wood and non-ferrous metals.
Price: from 208 rubles.
Buy
2. Automatic center punch
One of the most essential tools in plumbing. Allows you to mark places for making holes, leaving small pits that prevent the drill from slipping and increase the accuracy of work. You just need to put the hardened tip to the surface of the material and press the center punch. There are models with and without a round handle. The former are slightly more expensive, but much more convenient.
Price: 195 rubles.
Buy
3. Metric thread gauge
A useful device for measurements pitch of internal and external threads from 0.25 to 6 mm. Useful for controlling and creating screw threads. Each of the blades is signed and corresponds to its size. It is very simple to use: just attach one of the blades to the threads and look at its markings.
Price: 326 rubles.
Buy
4. A set of taps and dies
Universal set of tools for creating internal and external threads. The set includes taps M3, M4, M5, M6, M8, M10, M12 - three for each size (for blind and through holes), dies M3, M4, M5, M6, M8, M10, M12, as well as holders for them and accessories, including thread gauge.
Price: 2 327 rubles.
Buy
5. Set of taps-drills
A special tool that drills a hole and simultaneously forms a thread in it. The taps are made of HSS and have hex shanks for installation in screwdriver. The set contains six pieces: M3, M4, M5, M6, M8, M10.
Price: from 542 rubles.
Buy
6. Step drills
A set of three step drills, which are very convenient for making large holes in sheet metal and soft materials. The hex shank is specially designed for use with a drill or screwdriver. Sizes - 3-12 mm, 4-12 mm, 4-20 mm.
Price: 368 rubles.
Buy
7. Deburring tool
A handy tool that helps you quickly remove burrs and clean bevels from bolts, studs, and pipes and small rods. Suitable for workpieces up to a diameter of 28 mm. There are two versions to choose from: with a standard hex shank and with a triangular shank.
Price: from 212 rubles.
Buy
8. Countersink
This tool also allows you to chamfer and debur, but already in the holes. Useful for expanding them to hide the screw heads. The diameter in the largest part is 13 mm, the shank is hex.
Price: 78 rubles.
Buy
9. Scraper
Locksmith tools, the main function of which is to remove burrs from the edges of sheet materials and holes. The curved knife cuts off everything unnecessary, and thanks to the comfortable handle, you can work without risk get scratched. Includes five spare blades (also sold separately).
Price: 138 rubles.
Buy
10. Bolt extractors
And these tools come in handy for removing broken bolts and studs. A hole is drilled in the damaged fastener, then an extractor is screwed into it. It bites into the remainder of the bolt or stud and, due to the left-hand thread, unscrews the fragment. The set includes eight extractors of various sizes for working with fasteners from 4 to 45 mm in diameter.
Price: 1 117 rubles.
Buy
11. Nut extractors
A similar tool to the previous one, but for loosening nuts with "lapped" edges. It works on the same principle: due to the left-hand notches. The head is put on the damaged fastener, securely engages and allows you to unscrew it. The set includes 13 extractors with a diameter of 8 to 19 mm.
Price: 1 436 rubles.
Buy
12. Gaikol
Another assistant in disassembling damaged fasteners, which will help out in the most advanced cases and help to defeat completely rusted nuts. The tool is put on from above, after which the stem with a sharp chisel at the end is tightened with a regular wrench and simply cuts the stubborn nut. There are three versions goods, which differ in size: 12, 20 and 30 mm.
Price: from 419 rubles.
Buy
13. Stamps
Die-cut stamps with numbers and all letters of the Latin alphabet, which are useful for stuffing various signatures on the instrument, metal and other surfaces. There are many options to choose from with font sizes ranging from 2mm to 12.5mm.
Price: from 464 rubles.
Buy
14. Pipe cutter
A miniature tool that will cut copper, brass, aluminum and plastic pipes, getting a perfectly flat edge with a rounded chamfer. Slide the tool over the pipe, tighten the clamping screw and rotate the device while holding the pipe itself. There are two versions on sale: for diameters 3–16 mm and 2–22 mm.
Price: from 383 rubles.
Buy
15. Oiler
A sturdy oiler with a durable transparent plastic reservoir and a flexible spout that allows you to get to the most awkward places. The peculiarity of the device is that its contents are literally injected under pressure. Thanks to this, it is possible to thoroughly lubricate the components, where the oil will not get in the usual way.
Price: 290 rubles.
Buy
Read also🧐
- 15 sets of hand tools from AliExpress for all occasions
- 15 accessories from AliExpress that empower your power tools
- 15 products on AliExpress for the joinery