12 festive hairstyle September 1

Simple options that will please and little girls, girls and adults.

1. Volume Spit without weaving with tape

What do you need

• Comb;
• some invisible gum;
• beautiful thin belt;
• invisible;
• hairpin.

How do hairstyle

Assemble the upper part of the hair in a ponytail. Slide the rubber strands over the middle, pass to the edge of the tape and fix invisible.

Divide the ponytail made previously in half, fold back and fix for the convenience of a clip. Fold the ribbon on the forehead. Under the tail to take another, collecting part of the hair on the sides and bottom.

Divide into two parts, the second tail, and lower the belt. Lift locks up, released the first ponytail and secure it on the second tail.

Assemble the sides and bottom of the hair more, and connect to the tail with tape and the released strands.

Release the hair barrette enshrined. Gently pull the locks on each side of the tape, holding the hair from the bottom.

Lift previously made a ponytail with a ribbon upstairs issued between strands and fasten the clasp. Assemble the sides and bottom of the hair more elastic and connect with hanging strands.

Remove the pins and release the hair with a ribbon. Gently pull the locks on each side, making a hairstyle volumetric.

Divide the bottom half ponytail and secure with a clip at the top. Collect all the remaining hair from the bottom with a ribbon in its tail.

Lower locks enshrined barrette. Straighten the hair on the sides of the band.

Tail with tape, lift up and fasten the clasp. Remaining at the bottom of the hair pick up a rubber band.

Remove the pins and pull the strands of elastic. Tail split in half, attach the top and bottom collect hair in a ponytail with a ribbon.

Release enshrined the hair and straighten the strands of elastic. Gather the hair in a ponytail and then pull the bottom locks on each side. Wrap the ribbon around the last gum.

2. Tails with a pattern of rubber bands

What do you need

• Comb;
• some invisible gum;
• curling for hair curling;
• 2 clip-bow.

How do hairstyle

Comb your hair and take along his forehead several thin tails at the same distance from each other.

A second tail from ear split in half, one part connect with the extreme tail and attach a rubber band. Divide the ponytail in half and connect the next part of the elastic strands to the second tail.

Continue pattern in the same manner. Half of the penultimate tail connect the rubber band with the latter.

Middle tail split in half and fold for convenience ago. Divide into two parts and reassemble all the hair of their bands. One half of the average thin tail should be in the left tail, and the other half - in the right.

Optionally, you can take the little provide designated, wrap around the base of the tail and the tips of the stick in the gum. curl hair and decorate with bows and tails.

3. High ponytails with spikelets

What do you need

• Comb;
• 2 conventional gum;
• 2 thin gum;
• 2 gum bows.

How do hairstyle

Divide the hair in half parting. One part of the fix at the bottom of a rubber band. In a second separate the top section of hair, and the rest also collect a rubber band at the bottom.

On top of her hair loose, take three thin strands and braid classic spica. An illustrative process is in the video below. Attach the ear of a thin rubber band.

Remove gum from the bottom on the same side and gather all hair into a high ponytail.

Repeat the same steps on the other side. Put on the gum tails with bows.

4. High ponytails with ribbons

What do you need

• Comb;
• 2 conventional gum;
• 2 bows gum;
• 2 long thin strip;
• 2 thin gum.

How do hairstyle

Gather hair at the sides in high ponytails and put them gum with a bow. Tie the tail to one tape. Its parts must be the same length.

Apply one end of the ribbon on the hair and twist the ends of the side. Spread the hair between them. Cover the tail of the other end of the tape and twist the ends already on the other side.

Put the tail between the tape and pull hair at one end. Twist the ends of the ribbon.

Again, place the hair between the tape and pull the strands on the other end. Twist the ends of the ribbon.

Continue to twist the tail of ribbon and pull your hair for volume. Attach the rubber band and wrap tape around it.

Likewise make a second tail.

5. High beam of twisted pryadok

What do you need

• Comb;
• a simple gum;
• roller to create a beam;
• several pins for the hair;
• beautiful thin ribbon.

How do hairstyle

Make high tail and insert it into a roll. Spread the hair around the roller, leaving to one side of a small open area.

Take a small strand of and divide it in half. Twist the one part, and twist the other, simultaneously twisting the latter.

Insert the lock of the bottom under the roller. Add to straightened hair lock of another, and the same twist thread under the roller. Continue to draw a beam in the same way.

The last strand of twisted wrap around the bundle and secure the pins. Flatten Tie the hair and around the bundle tape.

6. Volume hairstyle with rubber bands

What do you need

• Comb;
• some invisible gum.

How do hairstyle

Assemble the upper part of the hair in a ponytail at the nape. Divide the hair above the rubber band in half and thread to the tail. Gently pull the strands of elastic on the sides. The detailed process is, in the video below.

Take two strands of hair on the sides and join them in the middle of the rubber band next to the first tail. Also the second thread tail through the top down. Gently pull the locks on the rubber band and tighten the tail.

In the same way make more 4-5 tails. Secure all hair rubber band at the bottom and touch up locksTo hairstyle looked bulk.

7. High twisted tails with rubber bands

What do you need

• Comb;
• several conventional gum;
• 2 thick lace gum.

How do hairstyle

Make the sides of two high ponytail. Put on conventional gum lace. Just below the tie another ordinary gum.

Divide the hair over it in half and pass through them into the tail. Gently pull the strands apart.

Repeat the pattern at the bottom of a few more times. Likewise Arrange second tail.

8. The low beam of the braid without braiding

What do you need

• Comb;
• some invisible gum;
• barrette for hair;
• several pins for the hair.

How do hairstyle

Place the hair on the side. Take down one edge of two thin tail. Divide the first half, located in the middle of the second ponytail and secure it on top of a clip at a time.

Separate the tail of the second one more strand of elastic band and connect it with the first tail. Remove the pins, pull the tail between the released strands up and also lock clasp for easy reference.

Continue in this manner until you have braided all the hair. An illustrative process is shown in the video instructions below.

Pull the strands apart to hairstyle looked more volume. Dopletite braid to the end, place it on the bottom and secure pins.

9. High ponytails with twisted strands

What do you need

• Comb;
• 2 conventional gum;
• 2 gum with large bows;
• 2 bows less gum or gum laced 2.

How do hairstyle

Divide the hair in half. Instead of the usual parting can be a zigzag. Then hairstyle will look more interesting. Gather hair into two high tail and put them gum with a bow.

Divide the ponytail into two sections and twist them together, simultaneously twisting and every strand of individually. Secure the bottom of the hair band.

Similarly, as to issue a second tail.

10. Simple high beam

What do you need

• Comb;
• ordinary gum;
• roller to create a beam;
• several pins for the hair;
• thick lace elastic.

How do hairstyle

Gather hair into a high ponytail. Insert it into a roll.

Spread around the hair and hide them under the roller. To secure the reliability of their studs.

Put on bundle lace elastic.

11. Two high beam of twisted pryadok

What do you need

• Comb;
• 2 conventional gum;
• several pins for the hair;
• 2 clip-bow.

How do hairstyle

Divide the hair in half and make a high ponytail. Take half of the tail and divide it into two parts. Twist the strands together.

Pull them apart for the volume.

Wrap the twisted piece of hair around the gum and fix bolts. Similarly, twist the other part of the tail and make voluminous.

Wrap it around the bundle and lock hairpins. Likewise make the second beam.

Decorate them with the front or rear pins-bows.

12. Loose hair from twisted strands

What do you need

• Comb;
• thin gum;
• hairpin-bow.

How do hairstyle

Divide the upper part of the hair in half. One half is divided into two strands and twist together, passing each of them twisting. Attach the rubber band.

In the same way the second part of the hair braid. Remove the gum with the first strands and connect its two strands in the middle.

Decorate hairstyle hairpin-bow.