Removing the protective glass from the phone without damaging the screen
Tips Educational Program / / December 19, 2019
What is the problem
Protective glasses have an adhesive layer by which tightly adhere to the smooth surface of the screen, especially after prolonged use.
Remove them is quite problematic: even if you can pry the window, it will just crack on or crumble into small pieces. Even more complicated task when you need to remove the already chopped protection to replace the new one.
How not to do
The first thing that comes to mind - use to remove the old credit card. Maybe you and will with due diligence, but most likely, the glass will simply break away, even if it can pry.
Acute stationery knife - also not a good idea, despite the recommendations of the Internet. The metal still has a metal: one wrong move - and the blade can easily leave scratches on the display.
Even silicone suction cup, with all of its harmlessness, is able do things. Due to the smooth surface of the glass so much rests on the screen, which is a good sucker can raise protection together with the sensor module or impair its hold.
How to remove the protective glass with a phone
Safely remove the armor can only insert any object between it and the screen. The tool must be soft enough so as not to damage the screen, and thus hard to squeeze.
It is best suited for this plastic or strong thread. The thinner the insert, the lower the probability of glass breaking off.
Removing the protective glass with a plastic
1. Find a plastic thickness of no more than 2-3 sheets of paper. It may be pointed pick, fine discount card or the packaging of tablets.
2. Search window corner where less likely cracks and gently pry it plastic to protect exfoliated.
3. Continue to lead a makeshift shovel on protecting the perimeter, going deep to the center.
4. When the glass is quite separate from the screen, insert into the gap a thin plastic card.
5. Promote the card on, while the protection is not completely depart from the display.
Removing the protective glass by a thread
1. Take dental floss, any thin and sufficiently strong thread or fishing line.
2. Pull the thread with both hands while holding his hands a smartphone, and pry the glass on one of the corners. Move left and right as if sawing. If the protection is broken - selects the whole site.
3. Continue to stretch the thread, pulling up to the second corner, and then move to the middle, while the glass is not completely depart from the screen.
see also🛠⚙📱
- How to clean a sofa at home
- How to use a multimeter correctly
- How to paste on a smartphone protective glass
- Life hacking: how to open a bottle of wine with a lighter
- How to clean a laptop from dust