20 interesting Christmas cards with their own hands
Do It Yourself Educational Program / / December 19, 2019
Christmas card with Christmas tree on the cover of volume
What do you need
- Green double-sided paper;
- line;
- pencil;
- scissors;
- red cardboard;
- glue;
- yellow paper.
How to do
Cut out of the green paper on one square with sides of 12 cm, 10 cm, 8 cm and 6 cm and 4 cm.
One fold in half.
Slightly bend the figure in half crosswise, so that in the middle remained a faint mark. Fold toward the center of the upper left corner of the rectangle.
Now just bend the upper right corner. You will get a triangle.
Make the same triangles of the other paper squares. Cut a rectangle of 26 x 15 cm cardboard red. Fold it in half crosswise. On yellow paper, draw a lot of little stars and one more, cut them out.
Lubricate the adhesive back side of a small green triangle. Stick it on top of the next card. Higher attach a big star.
Coat the glue the same side of the triangle slightly larger. Attach it so that the top a little sign taped to the previous triangle inside.
In the same way all the other glue the triangles forming a Christmas tree.
Add paper stars on the cover.
What other options are there
A similar tree can be glued together from paper circles:
Christmas tree is easy to make from a wooden stick and a paper accordion:
And one more very simple version of the accordion:
Christmas card with a Christmas tree inside the volumetric
What do you need
- Blue double-sided cardboard;
- White paper;
- scissors;
- glue;
- green double-sided paper;
- yellow paper;
- pink paper.
How to do
Bend blue cardboard in half crosswise. White paper, cut roughly in half along a wavy line. The figure should look like snowdrifts. Grease glue and attach it to the bottom of the blue sheet. Again bend the card in the future fold.
Cut from green paper large circle. You can circle the plate or use a compass. Fold it in half and cut along the crease. You will need only one half.
Fold the piece in half and unfold. Fold dividing it into two parts. Fold one edge of the middle of one of them.
Turn over and bend the "triangle" to the fold.
Continue to fold the paper in the same way, each time turning it. The crook cut a few small triangles.
Open the paper so that the middle part was convex with holes. Stick the Christmas tree in the middle of the card.
From paper-cut yellow star. Of yellow and pink - small round ornaments on the Christmas tree. Of white - round snowflakes. Glue the parts on a postcard.
What other options are there
To make such a card, you need to cut a lot of the same paper firs and glue them together:
But what a magnificent herringbone obtained from the paper bellows:
Christmas card with a snowman with his hands
What do you need
- Light pink cardboard;
- blue cardboard;
- line;
- pencil;
- scissors;
- glue;
- compass;
- white cardboard;
- blue pen;
- volumetric double sided tape;
- brown cardboard;
- any colored or patterned cardboard;
- orange cardboard;
- Red and black crystals (you can take markers);
- shaped hole punch "Snowflake".
How to do
Cut out a light pink cardboard square width of 13 cm and out of the blue - 12 cm. If you want your card was revealed, make a pink cardboard rectangle measuring 26 x 13 cm and fold in half. Glue the blue detail on the pink so that the sides get the same frame.
On white cardboard, draw a circle with a radius of 4 cm, 3 cm and 2.5 cm. Cut them out.
Touch up the edges of dots in blue felt-tip pen.
Glue on the back side of a large range of two pieces of tape. Glue the circle in the center of the blue square. Draw on a brown cardboard pen-twigs and attach them to the back side of the middle circle. His stick in the center of the first.
On the reverse side of a small circle glue the two strips of colored or patterned cardboard. It will scarf snowman. Attach the circle on average closer to the top edge. Make buttons of the eyes of the black paste and mouth - of red rhinestones smaller. If no paste, you can just draw everything felt-tip pen. Of orange cardboard cut elongated triangle and stick the nose between the eyes.
Cut snowflakes out of white cardboard and glue them around the snowman.
What other options are there
Cute snegovichok of wool:
Volumetric snowman from paper circles:
Here's an interesting card with a snowman inside voluminous:
And also you can make a snowman of buttons:
Christmas card with balls Christmas tree with his hands
What do you need
- Red cardboard;
- shiny silver foamiran;
- pencil or compass;
- scissors;
- volumetric double sided tape;
- color ribbon;
- glue gun;
- color ribbon thinner;
- fine brush;
- white gouache or watercolor.
How to do
Fold the cardboard in half. From foamirana cut circle. You can cut around something round or use a compass.
Glue on the reverse side wheel pair pieces surround the tape. Attach item on the card cover.
Make of tape bow and stick on the ball.
Of thin tapes made another bow and glue to the previous.
Above the ball, draw a lot of white dots in gouache or watercolor.
What other options are there
An voluminous Christmas balls:
This video shows how to make a ball of sequins and rhinestones:
Another cute option:
But an unusual balloon filled with:
Christmas card with Santa Claus with his own hands
What do you need
- White paper or cardboard;
- pencil;
- scissors;
- line;
- black paper or cardboard;
- Orange paper or cardboard;
- peach paper or cardboard;
- red paper or cardboard;
- green paper or cardboard;
- stationery knife;
- hole puncher;
- light blue cardboard;
- glue;
- volumetric double sided tape;
- red rhinestones;
- pink paper or cardboard.
How to do
White paper, fold in half crosswise, cut half. Draw on one part of the beard, as shown in the photos and in the video below, and cut it.
In the second half of the sheet of white paint whiskers and cut them.
Of black paper cut strip 15 x 2.5 cm, from orange - square with sides of 4 cm. On the square draw two parallel lines at a distance from each other. Walk them through with a knife. On the strip around the middle, do punch three holes. Insert the strip into the square so as to obtain a belt.
From peach paper cut rectangle of 9 x 4 cm. Draw on it a shape, like a piece of paper and cut it.
Cut two rectangles measuring 10 x 4 x 15 cm and 11 cm of red paper. On the one narrow side of a large part slightly rounded corners. On the small details, draw the top of the cap, as shown in the photos and in the video below.
Of the two paper-cut green rectangle measuring 3 x 1.5 cm. Fold them in half lengthwise. Draw on the bend half the length of the embossed leaves. Cut and straighten. A small square of white paper on a diagonal fold, then fold twice more. Draw a semi-circle in the corner, and cut out - you'll have a flower.
Bend blue cardboard sheet in half crosswise. Glue to the bottom of the cover of a big red piece rounded up. The upper part of the large white part promazhte glue and attach to the bottom of a few pieces of tape. Glue the piece just above the middle. Where is Scotch, is a beard.
Glue on top of a red cap. Side between the cap and a beard on the tape, attach the white flower on it - green leaves, and in the middle - rhinestones. Under the cap stick peach detail.
Add black paper round eyes and pink nose round. Lower on the tape, attach the mustache.
At the bottom of a paper card glue belt.
What other options are there
Santa Claus, applications executed in the art:
And here's how to make a New Year's character with a cotton beard:
see also🎄⛄️🎁
- How effectively a gift pack of any shape and size
- 20 cute snowmen with their hands
- 8 really New Year's hairstyles for girls
- 10 ways to make a beautiful gift box with his hands
- 50 steep fir-tree toys with their own hands