DIY: How to make a fashionable coat hanger from the old bulbs

Here's a little thing, as in the photo below, you can buy in the shop overseas. This hanger. $ 20 plus shipping a penny and all that jazz. We want to tell you, and most importantly - in great detail to show how to make a hanger itself.

@photo

On the job you will leave no more than an hour, then left only to wait until the cement hardens. Need light (whether or not blown), cement and some simple tools:

We advise to wear gloves: though the process is not dangerous, but still work with glass. First phase: we reveal a light bulb with pliers and carefully remove all unnecessary.

Now it is necessary as a light bulb should be rinsed from the inside, it is best to some dish detergent to lay cement as closely as possible:

The following steps: preparing a cement slurry, the bulb installed in a small cup or any other container where it can be locked in a vertical position. Fill it to the brim with cement. The author used for this conventional teaspoon.

Now, take a pencil and spread the cement on the inside of the bulb. Insert the screw. Wipe with a damp sponge bulb outside, remove all dirt. After 48 hours, the cement must finally come to grips.

We arm with a drill, drill a hole in the wall.

Hanger is ready. If you do not like gray, you can experiment with different shades of cement.

It is possible to develop the idea and place the hanger ponaryadnee: