10 original cards on February 23 with their hands

1. carved card

What do you need

• template;
• thin colored paper;
• scissors;
• thick colored paper;
• pencil;
• glue;
• highlighter;
• line.

How to do

Print the template on a thin colored paper and cut out a rectangle. Circle it on the dense colored sheets and also cut.

Return to thin paper. Cut the template for all the solid lines to get a picture.

Fold the paper in half and dense paste it prepared detail. The ship will be on top, and through the sea anchor and will be visible contrast basis.

Print on colored paper greeting small inscription, cut and paste on a postcard. circle letters felt-tip pen. The contour of the glued element and the most cards apply dashed lines, mimicking the stitches. Sign the inside track.

2. Fold-out card with a star

What do you need

• scissors;
• white construction paper;
• line;
• pencil;
• red, yellow, white and blue paper;
• glue;
• stationery knife;
• pen or felt-tip pen.

How to do

Cut a piece of thick paper measuring 17 x 15 cm. Pull back on a narrow side of 8.5cm and draw a vertical line. Spend another line at 2 cm from this.

Cut out red paper square with sides 11 cm. Make him a star, as shown in the video. Glue this element to the paperboard so that the top and bottom corners located exactly on the second drawn line.

Office knife to make a cut along the contours of the star to the right. From left to work through the contours of only up to the first drawn line. With the push slide somewhat thin, but not very sharp on two marked lines, and then bend the paper. Write on the back side of the star greeting.

Cut out of yellow paper square with sides 7 cm and make the same sprocket as red paper. Bend its planned lines that it was bulk, and stick to red star.

Cut out red, blue and white paper with two thin strips. Glue them diagonally to the white paper so as to obtain Russian flags. Ready flags decorated with clear contours fix lower and upper corners of the card.

White paper, cut a small strip of thick, process corners so as to obtain a ribbon, and fold. Write to her greeting words and stick on a postcard.

3. Card for superman

What do you need

• template;
• white, red and yellow paper;
• scissors;
• stationery knife;
• pencil;
• glue;
• white construction paper.

How to do

Print the template on white paper and cut out a large piece. For internal sections is better to use a knife stationery. Circle the figure entirely, and yellow on red paper - only the outline. Cut along the lines drafted.

Glue the red detail on yellow. Place the blank at the bottom of thick paper so that the sharp end is close to the edge. Fold the paper along the top drawn line and cut at the bottom.

Glue the colored shapes on white. Sign the card inside.

4. Card with a pattern manifested

What do you need

• scissors;
• paper in two different colors;
• line;
• pencil;
• glue;
• thick film;
• black permanent marker;
• colored markers or crayons.

How to do

Cut out of color paper rectangle measuring 19 x 14.5 cm. Measure the one narrow side of 1 cm and bend the sheet along this line. Then fold it in half crosswise. Inside, on the side of the sheet where there is no bend, draw the rectangle smaller. Carefully cut the resulting window.

Fold the card and draw on paper of a different color. Add to the two long sides of 0.5 cm, and cut. Bend part of the planned lines. Grease a narrow strip of adhesive and attach the cards inside. The lower part of the leaf paste is not necessary. Then you'll have a pocket of paper.

Then glue the card so that the holes were from two narrow sides. Cut out of the paper of a second color rectangle measuring 15.5 x 8.8 cm and a first color of the paper - the size of 8.8 x 2 cm. Circle the larger figure on tape permanent marker and cut.

Put a small piece in half lengthwise. Glue part to bend to the narrow side of the rectangle, the top insert film and then attach the second part of the small parts. Details are shown in the video.

Draw a film pencil tank, plane or something else thematic. You can write a greeting, but the letters should be large. Paint the picture or letter. Close the film image and draw the contour of a permanent marker.

Insert the sheet with a pattern in the pocket cards and the film - in the window of paper. The outside will only be visible outlines of the picture. But if you pull the item, color will appear drawing. Postcard can be left as is, or sign it in the box.

5. Card suit

What do you need

• scissors;
• blue, white and red paper;
• line;
• pencil;
• paper with a pattern;
• glue;
• 3 buttons.

How to do

Cut out of blue paper rectangle measuring 31 × 18 cm. With the two narrow sides of the draw a line at a distance of 8 cm from the edges of the sheet. Fold the paper along the planned lines. You will get a jacket.

Of white paper cut rectangle measuring 34 × 14 cm and fold it in half crosswise. This is the shirt for a suit. Insert it into his jacket folded down and glue on top of patterned paper.

For collar cut-out piece of white paper measuring 11 × 5 cm. Draw a line from the long side, stepping back from the edge of 1 cm, and bend the piece to her. Cut off the top, as shown in the video. The remainder of the collar on the stick over the top of the shirt, and the very attach it to a jacket. Sheet-shirt to be opened downward. All the details are in the video.

Close the jacket lapels and make bent paper diagonally upwards. The ends of the strips of white send to each other and form a collar. Red paper-cut square and take tieAs shown in the video. Stick it on a shirt.

On top of a little walk on the tips of the scissors shirt, so that they become semi-circular. Cut out of the blue paper two small long rectangle. Slightly twist them and attach to the bottom of the jacket with two sides. This pockets. Attach buttons and a small handkerchief of red paper. Sign the card on the inside of the shirt.

Clearance allows options. For example, you can add a vest and tie:

Or do not open and the retractable shirt:

6. An helicopter taking off

What do you need

• blue construction paper;
• pencil;
• line;
• scissors;
• stationery knife;
• glue;
• White paper;
• markers;
• foam double sided tape.

How to do

Put on thick paper mark on all sides at a distance of 1.5 cm from the edge and draw a line through them. Fold the sheets in half crosswise. Spend scissors along the lines on one side. On the other - drawn by cut squares at the corners of the sheet and bend inwardly the resulting strip.

Open the card and the future on the other side of the paper, where there are no creases, place a mark at a distance of 5 cm and 8 cm from the bend to the left and right. At this height mark a distance of 2 cm from the edges of the paper. Connect the dots and lines of cut window.

Close the card. To the right of the window put a notation at the same height on the folded strip. Separate scissors intended piece. Cut a strip of a size 19 x 3 cm, and dispose one side of the corner. Attach the horizontal element to the strip, which got out of the window.

Glue the inside of the white paper cards. Insert strips connected by inside, as shown in the video. Glue the bottom and top of the card. The strips should be put forward and opened the white paper. Write to her greeting.

Cut out of a cloud of white paper and a helicopter and paint them. With foam scotch tape paste the helicopter to a retractable strip and a cloud - on a postcard.

7. Postcard c surround the ship

What do you need

• template;
• dense white paper;
• stationery knife;
• pencil;
• colored paper;
• scissors;
• glue.

How to do

Print the template and cut along the gray lines. With the push slide somewhat thin but not very keen on the red and blue strokes. Carefully bend the figure. The red lines should be directed inward movement, and in blue - out.

Straighten a card and drag it to the colored leaves. Cut out and glue along the contour of a white paper. it is not necessary to attach the ship itself, so that it remains three-dimensional.

Card can sign the outside or the inside near the ship.

8. Greeting card with butterfly

What do you need

• colored construction paper;
• scissors;
• paper in two different colors;
• glue;
• glue gun;
• White paper;
• a pen.

How to do

Fold a sheet of thick crosswise in half. Cut out the paper of the same color three middle same square. Fold each in half and twice more in half. Then expand and bend them on a zigzag lines, as shown in the video.

Glue the folded parts to each other so as to obtain a large accordion. cut out from paper second color stripe and the small rectangle. Glue a strip in the center of accordion and slide the edge.

Pin resulting butterfly on a postcard by means of glue-gun. At the bottom is a colored rectangle, and on it - a smaller rectangle of white paper. On this item, as well as inside the card write congratulations.

Instead of a butterfly can decorate the paper composition ties:

9. Card with a balloon

What do you need

• white and brown paper;
• blue paint;
• thin and wide brush;
• scissors;
• pencil;
• paper of different shades of blue;
• double sided tape - optional;
• yarn;
• black pen.

How to do

Fold the sheet of paper in half. Fine brush to draw the outlines of clouds ahead, and with the help of a thick - do blue background, as shown in the video.

Cut out of colored paper four identical circles. Bend the three of them in half. Glue them to the center fold of the fourth circle. Pin bulb at the top of card or using an adhesive tape.

Cut out four small strips of yarn and brown paper - basket ball. Stick them on the bottom, draw a yarn circles, but in the basket - a fine mesh. The bottom and inside of a cloud postcards congratulations.

10. Postcard with Russian flag

What do you need

• scissors;
• red, blue and white paper;
• glue;
• green and white construction paper;
• black pen.

How to do

Cut out red, blue and white paper in the same wide strips. Glue the narrow edge of each of them. Attach details to the green paper.

Cut a sheet of white dense long thin strip. Top treat scissors paper so as to obtain diamond. Stick the strip to the left of the colored parts.

Of white paper cut the ribbon, attach the flag of, and make her a congratulatory inscription. Circle the ribbon and a greeting card on a path. Sign the composition from the reverse side.