How fast do non-confusing cable for iPhone and iPad

If you often take with complete lightning cable for your iPhone or iPad, you probably encountered the problem of his entanglement. To resolve this issue is not necessary to buy a spiral cable. It is very easy to make at home.

That something like this looks any cable, if it is to throw in a bag. Although, to unravel its not as difficult as headphones, but also not the most interesting occupation. Moreover, permanent creases can damage the integrity of the wire or sheath.

To make the lightning spiral cable you only need a pen and a hairdryer. It is desirable to use a metal or unnecessary old pen. Hair dryer you can use any.

To begin, slowly wind the cord around the handle, but do it carefully. If the cable will lie crooked, it will remain forever. To avoid obezhech hands on the next stage, use tape to fasten both ends of the cord, as shown in the figure.

Now take a hair dryer and uniformly heat the entire surface of the cable wound around the handle. Try to stick to such a temperature that the plastic around the lightning became more lenient, but did not start to melt. If too much cord to overheat, it will deteriorate and will cease to work. Be careful.

After a few minutes wait until the heating cable to cool down and remove it from the handle. Voila! Now you have a lightning-coiled cable.

via Tuaw