How to clean your phone speaker

How to understand that it is time to clean the speakers on the phone

Clogged speakers are an inevitable process that happens sooner or later. The only thing that protects them from dust, moisture and external influences is thin meshes. Over time, they become clogged with motes and other particles, which slowly but surely accumulate and clog the holes provided by the manufacturer.

Most often, the upper, conversational speaker, which we apply to our ear, gets dirty. The lower, polyphonic one, which is used for ringtones, audio playback and speakerphone, clogs less often, but is also prone to this.

You will immediately understand that the time has come to put things in order by the deterioration in the audibility of the interlocutor during a conversation. The sound at the same time becomes quieter and more muffled, crackling and extraneous noises appear.

Depending on the conditions in which the phone is used, cleaning will have to be repeated every six months to a year. In rare cases, even more often.

Do's and Don'ts for Cleaning Phone Speakers

There is a lot of conflicting and even harmful advice on the web, so it's important to use common sense and exercise caution. Using unsuitable items or chemicals can easily damage your device.

As tools for extracting dirt, the most suitable option is a toothbrush. It should be new so as not to leave traces of paste, and preferably with a hard, pointed pile for better penetration. It is allowed to use toothpicks and, with great care, special compressed air for cleaning. But the needles that are offered to pierce the mesh cells should not be used.

Gum, kinetic plasticine, semi-dry glue and other similar means, which, according to the plan, should collect dust and dirt, it is better not to take it, because in practice it does not work. Substances will simply get stuck in the holes and clog the mesh even more.

As for chemistry, pure alcohol or special gasoline for lighters is best for dissolving dirt. With a large amount of fat, you can use hydrogen peroxide. But in no case should you use perfumes, eau de toilette or alcohol and other alcohol-containing liquids that seem suitable at first glance. They contain various oils that aggravate pollution, and water, which conducts current and can lead to a short circuit.

To remove debris, cotton pads, paper towels, cotton swabs, wet and dry wipes are suitable.

How to clean the speaker on the phone with light pollution

This option is suitable for the simplest situations, when moisture got into the speaker and a little dust. The essence of the method is to push foreign particles out with the help of the sound pressure of the emitter. Some phones, such as Xiaomi, even have this feature built in. To clean up, do the following.

Android smartphone with cleaning function

Open system settings. In the "Advanced" section, look for an item called "Speaker Cleaning". Launch this feature and turn your device face down while playing a sound while shaking your phone.

iPhone and any Android smartphone

If there is no such function in the phone, then simply install one of the applications through Google Play or the App Store on the request "clean speaker". For example, these.

Launch the iOS or Android app and click the Clean Speaker button.

Increase the volume to the maximum, turn the phone face down and shake the gadget while the signal sounds.

If necessary, repeat the procedure several times.

How to clean the speaker on the phone with heavy pollution

In more complex and advanced cases, you need to act a little differently. The whole arsenal of improvised tools and chemistry is useful here.

What you need

• Toothbrush,
• toothpicks,
• cotton buds,
• napkins,
• alcohol or gasoline for lighters,
• compressed air for cleaning electronics.

How to do

1. If there is a lot of dirt and it is dry, then the first step is to clean most of it in this state. It will be easier. Take a toothpick and, gently prying off the debris, pick it out of the holes. If it's not that bad, go straight to the next step.

2. Take a dry toothbrush and, turning the phone upside down with the speaker hole, gently brush the dust to the side.

3. If compressed air is available, gently blow off the dirt, directing the jet at an angle to the screen so as not to damage it.

4. Further, the remnants of dust, if any, are most conveniently cleaned with the same brush, but with a cleanser. In difficult cases, you can put a couple of drops of hydrogen peroxide and wait a few minutes until the dirt dissolves.

Lightly soak a cotton swab in alcohol or lighter gasoline and apply the liquid to the speaker mesh. Do not overdo it so as not to damage the device.

6. Use a toothbrush to remove any remaining dirt. Move in one direction, not in a circle. This will have a better chance of pushing the dirt out rather than rubbing it in deeper.

7. Wipe the mesh of the speaker with a clean cloth to completely remove the dust. It is convenient to clean the circular holes of the polyphonic speaker with a broken toothpick (without a sharp end) wrapped in a napkin.

8. If necessary, moisten the screen again with alcohol or lighter gasoline and repeat the procedure until the speaker is completely clean.

9. If you have compressed air on hand, end up gently blowing out the speaker meshes, directing the jet at an angle.