Layfhakery Hello! We publish our next Highlight electronic minizhurnala about useful gadgets, unusual concepts, future and present. Here is that rare statement, start with where you can not read it until the end. To begin, prepare two cans of beer ...
The antenna of beer cans
Very often a situation arises when the nominal bad TV antenna receives broadcast channels. This can happen on a picnic, in the country, in rural homestead. And in a city apartment, especially in old houses the reception is not always ideal due to load mismatch and a common antenna in the house.
Meanwhile, even the laziest and know nothing about the technique a person can in 10 minutes, literally from the garbage, make a real TV-antenna, quality of which is comparable with the industry samples. It happens that it works even better than the purchase - catches more channels and delivers a better quality picture. This is all the more surprising that the antenna consists of only... empty beer cans.
Tools and materials:
• two empty beer cans
• tape or electrical tape
• Two self-tapping screws
• aerial cable
• plug
• stick
• screwdriver
Step 1
Banks primatyvayutsya to stick duct tape or electrical tape.
Fasten the banks to stick tape
step 2
The banks are screwed screws, and cable ends are stripped and screwed to the screw.
end of the cable is wound on the screw
step 3
The cable or tape to tape strength is bound to stick.
The antenna is ready!
Can be used instead of a stick a wooden hanger, then the antenna can be hung anywhere.
Instead of a stick, you can use the hanger
For good reception distance it is desirable to select between banks experimentally, but on average it is about 70 mm.
If the cans are not cut off from the tabs-openers, the antenna cable can be attached directly to them using a screw and a nut and washer.
When installing the antenna on it will be exposed outdoors exposed to various weather conditions such as rain, snow, wind, etc. In this case, for stiffening and integrity of the whole structure, both banks can be placed in a large plastic bottle of beer, after cutting off her and bedplate neck. For a cable in the middle of the resulting cylinder is necessary to pierce a hole, which, after connection need scalded with hot water. Plastic bottle is deformed and seals the hole.
It should be noted that the scope for creativity in the field of amateur antennostroeniya virtually limitless. Evidence of this is the picture below.
Improved antenna with several sections
It's long been known design, make more out of tin cans of peas
Do not do such an antenna in a single day, it is harmful to the liver! @photo
Perhaps out of different kinds of beer cans receive the signal in different ways. Offer readers their own to clarify this issue previously tasted the contents of the jars (just kidding, of course)! Enjoy your creativity!
via
what methods beer application improving the signal you know?
Read in the latest edition minizhurnala a 3d-scanner, the solar battery of the cut grass, a bag with a speaker for bike and see the humor. Subscribe to the magazine and do not miss anything!
P.S. The latest photos found author, Here is what he writes: "A few years ago, waiting for the match Liverpool - Arsenal, was saddened by the fact that the wind blew the antenna. The idea worked quickly helped cans of beer from the then title sponsor of my team Liverpool company "Carlsberg", kept for some reason :))) "