How to cope with the problem by lightning

Since the invention of the zipper, it is not particularly changed. However, as a problem with it. Rotor is stuck zipper teeth do not come together, the tongue falls off the slider. If these problems are annoying you, here are some ways to solve them without having to replace lightning.

How to win the jammed zipper

So Lightning is stuck and does not go down, and you were caught his thing, because in order to remove it, you need to unzip.

Take an ordinary pencil graphite rod and rub it the zipper teeth. This should help. If not, you need to increase the slip such as rub the teeth with soap, lip balm or cleanser that reduces friction.

With a cotton swab to apply grease and buckle fastener prongs. Then pull the buckle down, repeat the greasing procedure. Continue as long as the buckle is not fully rasstegnotsya.

The teeth do not close or diverge

This is one of the most common and annoying problems. To get started, try to repeat the trick with a pencil and soap, maybe it will improve the slide and allow the teeth normally closed.

If this does not help, therefore, something to prevent the slider to work normally. Look, if not stuck in the lock thread or cloth, carefully inspect all the teeth, maybe some of them bent. In this case, it is necessary to straighten out with pliers, and lightning will be closed normally.

If you do not hit the buckle and all the teeth are straight, maybe it's in the slider. Over time, the sliders are loosened and no longer hold the teeth together. Take the pliers and squeeze the slider, so he took the teeth again.

If you have damaged a few teeth on the zipper at the beginning, you can simply sew it over the site of the damage, if you can unzip enough.

Clasp not fixed

When the zipper slider is not fixed on the jeans, you can get into a very awkward situation. If you need to go urgently, and wear nothing more you can do so: threaded through the slider ring of keys, put on the button, and then fasten the loop. For the same, you can use the eraser.

If lightning Recurrent and press the slider does not work, it is necessary to replace it. First, with the help of pliers, remove the old slider and metal restraints with a zipper. Then pull on the zipper slider and new with pliers tighten stops.

Broken tab on the runner

To solve this problem quite easily: a clip or a ring of keys to help you. However, it looks not very aesthetically pleasing. There is one way out: the wire and the connector for the phone.