How to paste on a smartphone protective glass
Tips Educational Program / / December 19, 2019
What are the pros and cons of the protective glass
Safety glass is several times harder than the strongest of the film, and therefore saves the device not only from scratches. As they say the producers, it is able to withstand even a hammer blow. To conduct these experiments, we do not recommend. But we can say, in the fall, most likely, will break it glued glass rather than the screen of the device.
In this case, this protection does not affect the sensitivity of the sensor and the brightness of the image.
However, glass is more expensive films. And you can pick it up for only a relatively popular models of smartphones and tablets.
What are safety glass
protective accessories Technology does not stand still, and developing together with smartphones. Now the market has a high-quality glass with oleophobic coating, rounded edges and frames, repeating design gadgets. Conventionally, all types of protection can be divided into three categories:
- 2D - conventional glass with straight ends, which do not reach the edge of the screen for about 1 millimeter;
- 2,5D - from such choices have little smooth chamfer on the perimeter, which are combined with a rounded body;
- 3D - special glasses with curved edges for a smartphone screen, the setting on the edges.
How to paste a protective glass
Step 1. Prepare the room
If dust gets under glass, you'll have to live with the bubbles on the screen of the gadget, or try to remove them. To avoid this, make a room wet cleaning, or at least ventilate the area with a clean cloth, preferably with a detergent, wipe the table where you are going to glue the defense, wash your hands.
Another option is to carry out all manipulations in the bathroom. In this case, the procedure is as follows:
- Turn a few minutes hot water, but rather take a shower.
- The steam will connect all the dust settles it on the floor, and the room will be almost sterile.
- Spread towel and sprinkle it faithfulness water from the sprinkler.
Step 2. Prepare tools
In addition devaysa and protective glass, you will need:
- Fluid for cleaning screens, antistatic or normal alcohol.
- Microfiber cloth.
- Clerical Scotch.
- Scissors.
- Plastic card or a scraper.
Step 3. Try and align the protective glass
It is necessary to ensure that all the holes and cut-outs perfectly matched. Here's how:
- Attach protection to your phone in the correct direction.
- Try so that all the gaps on the contour are identical.
- Glue two or three strips of adhesive tape 3-4 cm long on the glass in one of the side faces.
- Secure the free ends of adhesive tape on the back of the smartphone.
- It should look something like the unfolding of the book.
Step 4. Degrease the surface of the screen
This will remove dirt and stains that can spoil the whole result. Proceed as follows:
- Use a damp cloth from special sets or sprinkle liquid screen display cleaner, antistatic or alcohol.
- Carefully wipe to remove remnants of the old adhesive film and other possible contamination.
- Microfibre cloth, wipe the screen dry.
Step 5. Make sure there is no dust
To be safe and sure to collect on the surface of the screen, any speck of dust, use the special sticker from the set, a strip of adhesive tape or electrical tape. Just peel off and stick them all over the display area.
Step 6. Stick the protective glass
Compared with the previous final step is the easiest. Here's what you need to do:
- Pick up the glass so that it stands up.
- Carefully remove it from the lower protective layer.
- Quickly dip the glass on smartphone. Due to mounting strips of adhesive tape, it will form perfectly.
- From the center to the edges smooth out air bubbles with a napkin or a map.
- Remove the fastening tape from the glass and the back panel.
see also📱🛡👍
- Why dry smartphone with rice - is a bad idea
- How you wear your smartphone - with or without a cover?
- Why not use a smartphone with a broken screen
- 6 tips on how to extend the battery life of your smartphone
- How do I know how much the smartphone is protected against dust and water splashes