Despite the fact that six iPhones have appeared recently, some owners have already accidentally drown their gadgets. In the first minutes after the moisture for the iPhone 6 cover you can somehow reduce the damage, but with injuries that have caused the water, nothing can be done - will have to give in for repair. Drenched iPhones, often amenable to repair and sometimes not even very expensive. In this post, we'll show you how to diagnose and repair "drowned" in the service centers.
Service Center performingApple Macplus.ru repairKindly provided us with a detailed report about the repair flooded iPhone 6. We look, remember and sympathize with what will have to face your gadget after a meeting with the water.
Thus, the workshop brought flooded with iPhone 6, with flooded for a long time, some days ago, and did not respond to any action.
To start the wizard dismantled "drowned" by unscrewing the two screws at the base of iPhone 6 and lifting the display module. Inside the gadget it is very similar to the previous model 5s.
After analysis of motherboard detached plume, and a module for the time being open to the side.
Generally, the penetration of water into the smartphone most affected motherboard, so you need to carefully examine her.
Master unscrews the screws around the perimeter of the board and off from it all loops. Subsequently remove the mounted "plug" and we see a disassembled iPhone 6, without the "motherboard" and display.
After inspecting the inside of the phone's outlook was optimistic - the elements do not have time to oxidize, as the water traveled under cover recently.
To find out why the iPhone 6 does not work, it was necessary to make a diagnosis the motherboard, but first - to clear it from the effects of drowning.
It uses a small ultrasonic bath Ya Xun YX200A.
"Motherboard" is immersed in the cleaning liquid and for a while under the influence of ultrasonic waves.
After cleaning begins diagnostics board with a microscope. Master reveals burnt items to determine which iPhone 6 repair required in this case.
In our case the owner iPhone 6 lucky - damaged only one element needed to turn a smartphone, and it is inexpensive. Master resolder board, replacement of parts, assembled iPhone 6 and turned it on.
Repair recessed iPhone 6 is not only a successful conclusion, but also cost the owner quite cheap. There are several reasons - the rapid treatment, a good master, and perhaps a little luck.
In any case, if your iPhone 6 wet, immediately bring it to the service center, without having to wait until he "himself to fix." The lower the oxidation of parts, the cheaper the repair will cost you.