OVERVIEW: 3Doodler - 3D-pen, which will revive your images

You know, as sometimes happens: you look at someone's figures - even necessarily on the works of great Artists and fans just to the creation - and think: "It's hard to believe that it is painted - so alive! "

Today I want to tell you about 3Doodler - three-dimensional handle, which is able to revive all that you draw. :) With this device your creations will no longer be confined to paper: be accustomed, you can do in the air.

Contents of delivery

3Doodler comes here in this amusing blue box.

Open the box, we see:

Appearance

Elegant and lightweight (weight 200–250 g) - that can be said about the 3D-handle 3Doodler.

Included no instruction in Russian, but then, to deal with the fact how the 3Doodler, you will not leave a lot of time. Here you will box out from under the device that contains a detailed "management pattern," so do not rush to throw it.

on / off button is both a mode switch.

Mode depends on the type of plastic rods the same name, which you will paint: ABS and PLA.

ABS plastic is more suitable for 3D-drawing in the air, while the PLA plastic is most often used for drawing on a variety of surfaces.

Two speed control button supply plastic - faster / slower.

Located above the buttons light indicator by which to judge the 3Doodler ready for use. The red color indicates that the device is warming up and is not ready for use, the blue - that can start working in ABS mode, and if the indicator is lit in green - you can begin to draw mode PLA.

The most part released 3Doodler - fan.

At the end of the three-dimensional handle socket is designed for plastic rods.

How it works

No complicated manipulation: Enables 3Doodler network (pen works only on the network), about a minute devaysu does it take to warm up. That 3Doodler ready to go, you can find out thanks to LED. After that, load the gadget in a plastic rod, push one of two buttons, which are responsible for the launch of the drawing process, and voila! :) The molten plastic will start to come out of 3Doodler, and only then everything in your hands - create.

Getting drawing

For help I turned to her friend Alexandra: Sasha editor works, but in his spare time likes to draw. Place for testing, we chose the creative 3Doodler - free space, or as it is more often called, anti-café. If someone has at least once been in such establishments, it knows how relaxed and friendly atmosphere reigns there.

From the first minutes of the pen anti-café visitors interested not notice it is simply impossible, so how their work 3D-gadget accompanied with a loud sound that I have personally been associated with chainsaw. People watched with interest, gave advice, and some even expressed their desire to independently test the 3D-handle in practice, and the phrase "It reminds me of glue gun" three times I definitely heard.

Even if you get along pretty well with pens and pencils, out to familiarize yourself with 3Doodler, you'll need a couple of hours. And at first you get something which only you will be able to find a suitable definition. This creation, for example, assembled called "Chernobyl forest".

The creative process:

Once you get used to working with 3Doodler, you will begin to receive more than meaningful creations. For example, the inscription.

Remember that you should not be limited solely to designs on paper. :)

Me of 3Doodler will now resemble that's a pendant.

Summarizing

• As mentioned above, 3Doodler utters loud and unpleasant sound, which may annoy you. So the best solution - to work through the headphones.
• Plastic rods very quickly come to an end. Therefore, if you feel that you will use 3D-handle quite often, it is better to order a plastic addition.
• Three-dimensional pen works only on the network - it turns out that your creative process will occur only in those places where there is a socket.
• The good news is that for the gadget does not need to synchronize with your smartphone. No need to guess before you buy, "make friends" if the Android version of your smartphone and Bluetooth with a new device.
• Remember that after an hour of continuous use 3Doodler enough very hot, and in order to avoid problems, you need to give devaysu rest.

3Doodler slogan sounds like «What will you create?», That the Russian language, if not word for word, can be translated into a bit provocative style: "What are you able to create?".

The list of what you can do to help 3Doodler, long enough, but I will not list here his constituents. You will create anything you want, if you attach to this effort, perseverance and their individual creative vision.

Handle for 3D-printing 3Doodler It was provided for review by Madrobots.