8 Best Hairstyles for Girls New Year

"Herringbone" from spit without braiding

What do you need

• Comb;
• invisible gum;
• hairpin-crab;
• Invisible or studs with colored pompons (pompons can simply be glued to the hairpin via glue-gun);
• Invisible or stud with a star (if not finished, decorative figurines, too easy to attach).

How do hairstyle

Assemble the upper part of the hair in a ponytail.

Take a strand from the bottom of the tail and wrap her gum. Secure the bottom of an invisible rubber band and hide it under locks.

For the convenience of fold up and secure with a ponytail at the time of crabs, not to interfere. Collect the loose hair into a low ponytail.

First release the ponytail and divide crosswise into two parts. Top section in half and lift the bottom upwards between them. Secure the barrette.

The two halves of the divided tail, connect the rubber band. Release the upper tail.

Divide it into two parts, the lower tail lift back up and secure. Release the upper tail. Gently pull apart the two strands of the other tail.

Repeat until the braid does not reach a low tail. Each new series pryadok pull to the side a little more, to get the shape of Christmas trees. Connect the low figure tail.

Add the bottom a couple of rubber bands on a small distance from each other. Insert in different places invisible or studs with pom-poms.

From above, insert the invisibility or pin with a star.

"Herringbone" of the four braids

What do you need

• Comb;
• invisible gum;
• crab-pins - optional;
• Invisible or studs with colored pompons (pompons can simply be glued to the hairpin via glue-gun);
• Invisible or stud with a star (if not finished, decorative figurines, too easy to attach).

How do hairstyle

The upper part of the hair gather in a ponytail. The bottom section in half and secure with elastic bands at the bottom for a while, or hairpins.

Divide the upper tail in half. The right half again divided into two parts. The left of the two lock not to interfere.

A second braid of the pigtail to the lower tail and lock. On the right side of the pull strands so that this side spit I turned at an angle.

Braid plait hair from the next part. Pull the strands apart evenly to spit was bulk. Secure.

Fold the braid at the time of the top, so as not to interfere. Fan the right lower part of the hair, and connect it with a rubber band two pigtails.

Likewise braid two braids on the left side of the head and connect them with the remaining lower tail. Do not forget to pull the strands. You should get a form of Christmas trees. If between the average pigtails long distance, pull the strands stronger.

Decorate the "Christmas tree" or invisible pins with pom-poms, and star.

"Candy Cane" from spit

What do you need

• Comb;
• clip-crab;
• invisible gum;
• Red ribbon;
• white ribbon;
• a large needle with a thick ear.

How do hairstyle

Separate the left part of the hair parting and secure for the duration of a clip, so as not to interfere. In the middle, take a small strand braid and also secure the bottom. Around this strand should be rounded parting - bending future "candy cane."

Separate the front part of the hair so that the next parting was roughly parallel to the previous one. The lower part of the hair pick up a hairpin. Top next to the rounded parting take a small strand. Divide it into three parts and start braiding spica, Gradually weaving the remaining loose hair and rounding it.

When parting run, continue to weave a normal braid. Tie her gum.

Pull the two ribbons in the needle. While holding the tip tapes, thread the needle at the beginning of spikelets.

Pull the ends of ribbon and tie a strong knot. Again pass the long end of the needle tapes.

Pull under the following strands. Do not overtighten.

Continue to twist the spike strips. Arrange them so that the white color alternated with red.

When the spike end, insert the needle with ribbon hair on the back side of the braid.

Remove all pins. Take on the sides a little bit of hair and connect them with elastic braid.

Trim hair style and cut excess tape ends. For grade may be pre-tie knot.

"Herringbone" of braids and tapes

What do you need

• Comb;
• invisible gum;
• green ribbon;
• hairpin or hairpin with a star;
• hairpin with flowers or other decorations.

How do hairstyle

Assemble the upper part of the hair in a ponytail. The remaining strands split in half and make two low tail.

The upper tail is divided into two equal parts. Plait braid from one to the bottom of the tail and connect it with him.

From the second half of the tail also make a pigtail and connect it with other lower tail.

Insert the tape first in one strand of the upper inner braids. Then pass through a neighboring strand of the other braids. Weaved part must be like over the braids. Smooth out the tape to the ends of the same.

Cross the top ends of the ribbon. One of them, insert the outside to the inside to the next strand of spit. Repeat the same with the other hand. Again crisscross strap ends.

Continue to weave the ribbon in the braids before the tail. The tips of the ribbons in the middle tie.

Insert the "Christmas tree" of stars and decorations.

"Herringbone" of fish tail

What do you need

• Comb;
• hairpin-crab;
• ordinary gum;
• invisible gum;
• pins or studs with Christmas ornaments (may simply sticking them via glue-gun).

How do hairstyle

Separate the upper part of the hair, and kill it at the time of crabs. The remaining strands assemble into a low tail with a conventional gum.

Assemble the upper part in a ponytail and secure with an invisible rubber band. Divide it in half.

On the front right side of the lock of hair of the small. Twist it through the same part of the hair and attach to the left side of the tail on the inside.

In the same way, add a strand from the left half of the tail to the right. The video below shows this process in detail.

Repeat the same process a few more times.

Continue to weave fish tail, Passing lightly pulling strands apart. The lower go down, the stronger the pull strands. Thus you form of hair "Christmas tree."

Continue braiding, leaving the bottom of a small tail. Fix a rubber band. Lower strands pull to the side so as to obtain a "tree."

Dissolve the lower tail and decorate hairstyle festive pins.

"Cap of Santa Claus" of the braid

What do you need

• Comb;
• invisible gum;
• clip-crab;
• 2 Red tape;
• red cloth;
• scissors;
• wool;
• stealth;
• glue gun.

How do hairstyle

The upper part of the hair gather in a ponytail. The bottom section in half and fix at the time of crabs. To the base of the tail tie belt so that the ends looking in different directions.

Divide the tail into two parts. The right is divided into three strands. Place the tape between the left and middle strands. On average perekin'te right hand, and at her - tape. The left strand of get under the center. If you have difficulty, see the instructions below.

Continue to braid pigtail in the same way. Fix it crabs.

Connect the rubber band Spit and the lower right portion of the hair.

Similarly, the second braid her hair, and connect with the other part of the hair.

triangle cut and paste between the braids of red cloth. If necessary, secure the invisible. For others the invisible glue cotton wool and make the bottom "cap" and a pompom on top.

"Herringbone" one spit

What do you need

• Comb;
• invisible gum;
• hairpin or invisible with a star (figure can be stuck via the adhesive-gun).

How do hairstyle

Separate the top of a small piece of hair and gather in a ponytail.

Begin to weave this tail braid.

Holding a scythe, slightly pull out pryadok little hair to the side. Do so between strands and tresses were stretched space.

Continue to weave the braid, pulling hair. Usual braid thus should be visible, and not become just flat. The lower descend, the more pull the hair, forming a "tree."

Finish braiding and secure eraser.

Plug in the top of "Christmas trees" pin or invisible with the star.

"Herringbone" two braids

What do you need

• Comb;
• invisible gum;
• color ribbon;
• studs or pompons with invisible or other ornaments (they can be glued using glue-gun);
• hairpins, invisible or barrette with a star (it is also easy to attach);
• hairpin with a small bow.

How do hairstyle

Separate the top of a small portion of the hair and make her a tail.

Fasten the base of the tail of the tape and divide the hair into three equal parts.

Put the lock of the left to the middle. Tape is located between them. Right under the secondary lock of rewound and drag over the tape. In the video below has all the details.

Repeat these steps. The tape should always be in the middle of the spit.

Braid therefore the entire braid. Attach the rubber band, leaving a tail at the bottom.

Fold the braid upward for convenience. weave spike from flowing hair on the contrary. To learn how to do this, we have already talked in a separate article. When all the hair is gathered in a braid, weave finish.

Holding spike, pull the strands apart, giving the form of spit trees. Fix a rubber band.

Lower the top braid and connect it to the lower gum.

Decorate hairstyle.