How to remove scratches on the car with their hands

Do It Yourself Educational Program / by admin / December 19, 2019

click fraud protection

Scratches on the car are inevitable. Your fault or not, sooner or later they will. Although such damage, as they say, speed is not affected, every car owner wants to get rid of them at any cost. Especially if the car is new or recently purchased.

Here are the main types of scratches and proven ways to deal with them.

1. How do I remove small scratches on the varnish

We are talking about small, thin scratches, noticeable only at a certain angle and can not be seen on a wet car. Such scratches affect only the uppermost layer of paint. And get them the easiest way.

wax polish

You'll need a wax polish, which is applied after washing. The thin layer of wax create a protective coating, and fill the scratches. The method is good because it does not require special equipment and skills. But, as you might guess, a lack of protection for long. After a certain time the coating will be applied repeatedly.

Polisher + abrasive paste

More effective method of eliminating scratches considered a special machine and polishing paste, slightly tapered. So it is possible to cope with almost any scratches, lacquer offending passages, but did not get to paint.

instagram viewer

Usually polishing is done by specialists. If you decide to act on their own, you will need:

polisher;
slightly tapered paste;
sandpaper P2000;
sprayer with water;
napkins.

Immediately before the procedure well, wash the car car shampoo and dry. Put the car in the shade or garage to the body is not heated by the sun, and scratch and the result of the work were clearly visible.

Treat the damaged place with water-dampened cloth and wipe dry.

Put on a little circle of paste and polish scratch, gradually increasing speed. Try not to stay long in one place, so as not to overheat the paint.

Continue polishing, alternating movement to the left-right and up-down. Treat not only a scratch, but the area around it. Often rinse water and clean place polishing circle of flying.

Polish up until the scratch is completely gone.

2. How to remove scratches on paint

If you have suffered not only paint, conventional polishing can not do. In this case, the damage can be filled restoration pencil, Matched the color of the car.

Appearance and the number of colors are reminiscent of pencils nail polishes. But they are made from bystrozastyvayuschih acrylic resins which perfectly fill scratches.

Before painting the scratches thoroughly clean and degrease the damaged place. Then gently brush to paint his flakonchike pencil.

Allow the paint to dry for 15-20 minutes. Full cure occurs in about a week, so that at this time the car better do not wash.

3. How to remove deep scratches and chips

Here, too, will help paint. But, unlike the previous method, first you have to treat the surface of the ground, and after applying the paint - and zapolirovat varnish.

As a rule, the funds necessary for the restoration of the metal reached scratches and chips are sold to the kit. It's the same acrylic paint, anti-corrosive primer and conventional, as well as a degreaser and transparent varnish.

Wash and dry the car. If there are chips or scratch rust, strip her fine sandpaper. Degrease the metal surface and seal damage masking tape border.

Treat the surface corrosion-resistant primer and let it dry.

Then apply a layer of conventional ground to smooth the surface and provide a basis for paints.

Apply the first coat of paint. Then, after waiting for the complete drying, apply a second.

After drying the paint cover the surface with clear lacquer.

4. How to remove scratches on plastic

Not less suffers from scratches and car interior. Abrasions covered by thresholds, door cards and other plastic interior parts.

plastic restorers

Again, make skin neat, you can use plastic restorers.

Such agents are sold in the form of aerosols, sprays and jelly. They have a good penetrating power and are designed to fill in the scratches. In addition, the composition includes wax restorers, returns to its former surface freshness.

Instructions for use are on the packaging with the means. As a general rule, reducing compositions are applied on dry and cleaned parts and left for a few minutes to dry. Thereafter, using a clean cloth microfiber surface is well polished manually.

A hair dryer or a lighter

More simple and budget way to deal with scratches on the plastic - is heating the building dryer in the resort - a lighter. Under the action of temperature damage literally tightened. This life hacking will completely remove small scratches and make deep less noticeable.

To eliminate scratches in this manner must be very carefully heat the surface is damaged, for a long time without stopping at one place. If scratching a lot, take breaks, so as not to melt the item and will not burn a hole adjacent to the plastic parts of upholstery.

5. How to remove scratches on the glass

One of the most unpleasant kinds of scratches. Scrapes and cobweb on the glass is not only spoil the appearance but also impair vision, creating glare and reflections. Eliminate them can be polished to a specialized service.

However, you can do on its own.

In this way, perfectly cleaned small scratches and abrasions from the brush wiper. Deep scratches, which cling to the nail, not completely gone, but smoothed, will be less. Polishing will need a special kit, which typically includes packing, circles and paste ceria.

Wash the glass and wipe dry. Mark scratch inside marker to monitor treatment area.

Place the nozzle on the drill and apply a little paste on the circle. At medium speed and polish scratches to small areas without much pressure.

Take frequent breaks, so as not to overheat the glass. Moisten it with water and then wipe dry.

Continue polishing from 30 minutes to 1 hour until the result is acceptable.

6. How to remove scratches on headlights

Scratches optics are eliminated in the same way as on the glasses. Conventional turbidity can be removed to try toothpasteBut still better to use special sets for polishing, Which include everything necessary for the procedure.

The sequence of actions is usually specified in the instructions. Usually you need to do the following:

Wash and dry your headlamp. Okleyte adjacent portions of the hood, bumper and the wing masking tape.

Treat glass with the abrasive cloth dampened with water. Then apply a coarse polish on the circle and polish glass at medium speed.

Rinse with abrasive and polish the surface is already using a fine-grained paste.

Clean glass and wipe dry, and then gently apply one layer of UV lacquer.

Leave your car in the sun for a couple of hours to pour the varnish. Full cure happening during the day - at that time the car must not be washed.