How beautifully packaged gift of any shape and size

How to package rectangular gift classic fashion

What do you need

• Wrapping paper;
• scissors;
• ordinary adhesive tape;
• double sided tape.

How to pack a gift

Unfold the paper and put it on a gift. On the narrow side, measure the amount of paper to make it a box covered three-quarters.

Measure the same amount of paper on the opposite side and cut the excess.

Put a gift wide side on the narrow edge of the paper.

Turn it on its side.

Then place and again put.

Measure from the present about 5 cm and cut the paper on the line.

Turn down a gift of the party with which he has opened. Attach a narrow edge of the paper to the middle of the upper face and fix a conventional adhesive tape. Paper should fit snugly to the box.

Place a piece of double-sided tape to the opposite edge of the paper.

Glue this edge to the distal edge of the upper plane of the gift. If everything is measured correctly, the paper will fit snugly and it is enough just to the right place.

Now, cover the sides of the gift. Fold down the top edge and secure a conventional adhesive tape.

Fingers go over the protruding paper to make crisp folds.

Fold the side of the paper for a gift and secure.

Likewise, fold and glue another part of the package.

Flatten the bottom edge, stick to it double sided tape and attach to the present.

Similarly, cover the opposite side of the gift. Walk with your fingers on the edges of the rectangle - as a form of packaging will be more clear.

What's more there is an option

square-shaped gift wrapped in much the same:

How to pack a gift square diagonally

What do you need

• Wrapping paper;
• scissors.

How to pack a gift

Lay the paper on a flat surface. Place the gift in a corner: wide side edges must be in contact with the paper edges.

Turn a gift to one side, and then place the flat again.

Bend the opposite corner of the paper and measure it at the point at a distance of about 5 cm from the present angle. In the picture a man just points to this point.

Keeping your finger on the desired point, turn the paper and cut along a line passing through a mark.

Cut another line perpendicular to the first. You will have a square piece of paper.

Take one corner of the paper and bend it a gift.

Then crumple slightly inside the right angle and bend that part of the paper. Walk fingers along the folds. Packaging should fit snugly to the present.

Similarly, then fold into the opposite corner.

Fold the piece of paper. Walk your fingers across all formed folds.

Start ticking off the rest of the pack. Make sure that the paper does not get out to the sides.

Fold the paper, leaving the area.

Bend the upper part of the bracket and slide your finger on the edge of a gift.

Slide the loose part under the corner of the paper. For details see the video:

What's more there is an option

This method uses a tape, but the paper should be much smaller than in previous ones.

How to pack a gift for a rectangular drapery

What do you need

• Wrapping paper;
• corrugated paper;
• scissors;
• ordinary adhesive tape;
• double sided tape;
• Tape - optional.

How to pack a gift

Cut two identical large rectangular piece of packaging and corrugated paper. Lay the wrapping paper face down and top place corrugated. Fold the bottom edge of the narrow two centimeters.

Fold the same edge so that the new curved strip was wider than the previous two. To avoid mistakes, see video instructions below. Fold this strip four more times.

Expand the paper. You have to stay visible bends.

Turn the paper face up. From the middle of the lower edge of the cut corner to the beginning of the fifth bend.

Slightly straighten left corrugated sheet. Fold the entire paper fan in the planned folds. For details see the video.

Turn the box and secure with tape fan in several places.

Place present on paper. Fold the part with a fan, as shown in the photo. Place the top of the opposite side of the package. See how many you need to cut to that part was hidden under the first. Then cut off the excess.

Open the paper. Apply for a gift left side and secure it to the right using double-sided tape.

Turn a gift. On the one hand bend inward the side edges of the paper.

Bend the inside of the upper edge of the paper and cut the superfluous if necessary. Glue lower edge using double-sided tape.

Repeat the same with the other gifts. If desired, tie ribbon.

What other options are there

Instead, fans can make a direct drapery:

It looks spectacular and diagonal draping:

And another cool version of the package with a tie specifically for men:

How to pack a gift for a rectangular pocket

What do you need

• Wrapping paper;
• ordinary tape.

How to pack a gift

Place present on paper at an angle as shown in the photo.

Fold a small corner of the paper for a gift.

Fold the piece of paper to the left of the gift, and secure with tape.

Fold the top corner, as shown in the photo.

Fold this part of the package for a gift. Make a fold over a clear - is the future pocket.

Turn gift and glue the tip of the paper from the previous step.

Fold the remaining paper in the same direction and secure with tape.

Include something in the pocket with the other hand present.

What other options are there

This video shows how to pack flat gift:

You can do the packing Direct pocket:

But another way to apply unusually Present:

How to pack a gift for a rectangular strip

What do you need

• Wrapping paper;
• scissors;
• double sided tape;
• paper for scrapbooking or other decorative paper;
• tape.

How to pack a gift

Cut off from the packing paper rectangle. To one side six times, measure the smallest face of the gift, and then once - the biggest. The other side should be such that the paper is easy to shut lying on her gift. All the details are in the video below.

Place the gift at the middle of the paper from the inside. Fold the bottom edge and walk along the edge of the rectangle with your fingers.

Then fold the top of the paper and mark the fingers fold.

Glue lower portion to the upper. The paper should fit snugly to the present.

Fold the corner of the paper as shown in the photo.

In the same way bend the other corners. Place the seam up a gift.

Fold the top corners to the center.

Cut the decorative paper strip slightly longer than the present, and twice has it. Gently fold the long edges and glue the sides of the double sided tape.

Horizontal glue strip on the upper corners of the wrapping paper.

Fold the lower forward corners of paper and glue them to the strip.

Tie a gift ribbon.

How to Wrap a gift in any form of package of paper

What do you need

• Wrapping paper;
• scissors;
• double sided tape.

How to pack a gift

Lay the paper face down. Place on top of a gift and bend the side of the paper. Measure as packaging, that it completely covers a gift.

Cut the paper along the marked lines.

Take away a gift. Glue one edge of the paper tape. Fold the opposite direction about the middle.

Glue on top of the other side, where there is tape.

Fold the bottom edge of a few centimeters. Then straighten and bend this piece of paper on each side, so that a triangle. Their middle should have on the intended fold. The details are in the video below.

Fold the top corner to the middle of the resulting figure. Lower corner bend so that it slightly overlaps the top.

Fold the bottom inside edge of the triangle. Stick it to the top. Unfold the bag and place in it a gift.

Double wrap the open edge of the package and secure with tape.

If the gift is heavy at the bottom of the package to be sure worth putting thick cardboard. But more can be done on top of the hole punch, thread the ribbon and tie back. Then the boundary will not have to glue.

How to Wrap a gift in any form of a bag made of paper

What do you need

• Wrapping paper;
• scissors;
• corrugated paper - optional;
• ordinary adhesive tape - optional;
• tape.

How to pack a gift

Cut a large piece of paper and place it face down. To pack looked interesting, it can be placed on top of a piece of corrugated paper. In the middle put the gift.

Connect the two opposing top corner of the paper.

Holding the top of the structure, add another corner of the paper.

And then the last corner.

Pinch the paper over the gift and fold it from top to packaging looked beautiful.

Reliability can be pasted to this place with tape. At the end of his tie with a ribbon.

What's more there is an option

This method is ideal for subjects in the form of a sphere:

How to pack a gift of any form in an envelope made of paper

What do you need

• Wrapping paper;
• scissors;
• double sided tape.

How to pack a gift

Cut a piece of paper and fold it in half crosswise. One half should completely cover gift.

Expand sheet. Fold long edges by about 1 cm. Again fold the sheet to form a fold slightly below the central. Adhere to the lower edges of the tape to the new fold.

Glue the bottom side of the paper to the top.

Fold the corners of the paper remaining, as shown in the photo.

Glue the corners and glue on top of a strip of adhesive tape.

Put a gift inside, and close the cover.

How to Wrap a gift in the form of a cylinder

What do you need

• Wrapping paper;
• scissors;
• double sided tape.

How to pack a gift

Cut out paper long rectangle. Its width should be such that the paper on both sides reached the middle of the cylinder, supplied by one side in the center of the paper.

Slightly bend the narrow side of the paper. Place the gift on its side in the middle of packing paper and wrap the opposite side.

Glue on top of the folded edge so that the paper tight fitting gift.

At the time, then fold one edge of the paper to put a gift directly.

Bend the tips of the upper part of paper. Take one resulting corner and bend it to the present.

Place the top of the paper, as shown in the photos and in the video below.

Continue to bend the paper in the same way around the circle, making crisp creases.

The remaining rectangle stick one under the authority of the package.

Do the same on the back side of a gift. If in the middle formed a small hole, cover it with a piece of paper or decorations.

What other options are there

This master class will come in handy if you do not want to use tape or simply did not have on hand:

How to pack a triangular gift

What do you need

• Wrapping paper;
• scissors;
• normal or double sided tape.

How to pack a gift

Cut a rectangle of paper larger than the present. Place the paper face-down, in about the middle of the place the gift. Fold the top edge of the lower narrow paper.

Tuck the lower right corner, as shown in the photo. If you have difficulty, see video instructions below.

Lift the right side of the paper.

Fold this piece next to the most acute angle.

Wrap the rest of the gift packaging.

Attach tip tape.

How to pack a bottle as a gift

What do you need

• Two kinds of packaging and corrugated paper;
• scissors;
• double sided tape;
• tape.

How to pack a bottle as a gift

Cut two rectangles of paper. One of them has to be a little less than a second. Put them on top of each other.

Turn the paper over so that the bottom of the smaller rectangle appeared. Put the bottle in a corner.

Begin to wrap the bottle in a paper.

Fold the corner to the bottom right side of the paper.

Keep spinning the bottle and turn in the right edge of the paper. The video below shows a detailed view of packaging process.

Wrap the bottle with paper completely. The tip of the stick packaging tape.

Squeeze the packaging around the neck of the bottle.

Tie this place ribbon.

What other options are there

In this video you will find four more original way to present the bottle:

How to decorate the wrapped gift

The classic version - sticking to it bow. It can be done independently of wrapping paper:

Or from tape:

Another idea - to make instead of a bow paper flowers:

Or glue artificial bouquet:

themed decor looks very cool. Here, for example, several ways to make packaging New Year holidays:

10 more incredibly cool winter ideas:

And one more classroom instruction:

So you can decorate a birthday present:

And Valentine's Day:

What else can be useful