How to make a birdhouse his own hands
Do It Yourself Educational Program / / December 19, 2019
Hang the birdhouse away from large branches. Then the birds will not pick up cats and other animals. At the bottom of the house need to put a bit of dry grass.
How to make a birdhouse made of cardboard
Note that this birdhouse is likely to last for only one season. After all, due to rainfall can soften paper. So do not use a conventional paperboard.
What do you need
- template;
- White paper;
- scissors;
- pencil;
- corrugated cardboard;
- color paper - optional;
- glue - optional;
- glue gun;
- ribbon for decoration;
- perch.
How to do
Print the template on the white paper, Cut and draw on corrugated board.
Cutting scissors and walk along the dotted lines do not cut through to the end. Figure can be pasted with colored paper.
Make the folds of the planned lines, and connect the parts birdhouse using a glue-gun.
Attach the top of the roof and insert into the small hole perch.
Full video instructions here.
How to make a birdhouse from the boards with his hands
Wood - the best material for the birdhouse. This house will serve more than one year, and reliably protect the birds from wind and cold.
What do you need
- manual or jigsaw;
- ruler or tape measure;
- pencil;
- 2-3 cm thick board;
- Screwdriver or screwdriver;
- screws;
- drill;
- perch;
- sanding block or a machine.
How to do
Saw wood four parts of size 30 x 20 cm and two pieces of 40 x 20 cm. On the last elements Spila top corners. It will be front and rear walls.
The front make a hole diameter of 5 cm - tapholes. Attach a side size of 30 x 20 cm towards the front wall and fasten the parts together self-tapping screws. In the same way the rear screw and another side wall.
Top, attach the remaining two parts so that they performed in front of about 5 cm, and rear - 4 cm. This will protect the birds shelter from the rain. Under the tap-hole drill a hole and insert the perch.
Sand wall and roof nest box. Inside, it should remain untreated, or the chicks will not be able to get out. Then saw out a suitable sized bottom insert between the walls and screw the screws.
Attach to the back of the long stick, for which you want to bind the nesting box to the tree with wire and nail.
You can leave the facility as is or decorate.
And you can give the lodge a different form. connecting fantasyYou will create a true masterpiece:
Also, the birds can settle in a nice hotel:
Or make them a terrific house made of boards and thick branches:
Or to build for their modern house, just like this:
Help feathered🧐
- 15 ways to make a bird feeder with their hands
How to make a birdhouse out of the bottle with his hands
In the house of the bottle to the birds can be cold, so it is best to warm. Plastic birdhouse need to securely fasten to a tree to avoid being disturbed by the wind.
What do you need
- greater plastic bottle;
- wide double-sided tape;
- Jute twine;
- heavy-duty adhesive for plastic;
- highlighter;
- scissors;
- woolen cap or sleeve from an old sweater;
- thread;
- needle;
- wild grass and dry grass;
- two large buttons;
- braid.
How to do
Glue strip vertically to the bottle tape. Tightly wrap the bottle with string, starting from the bottom. For reliability, you can seal it with glue.
Draw on the bottle a small window, walk along the contour of the glue and cut. Put on a hat or a piece of construction sleeves and sew the tip. Top firmly sew tufts of grass. Obkleyte notches braid and decorate with buttons.
Do not dispose of the bottle🧐
- New life familiar things: plastic bottles
How to make a birdhouse from a log with his own hands
Another option durable wooden dwellings.
What do you need
- log;
- saw;
- drill;
- jigsaws;
- chisel;
- hammer;
- Screwdriver or screwdriver;
- screws;
- for healing wounds trees - optional.
How to do
Spila top of the timber so as to obtain a lean-to or gable roof.
Drill with a long drill bit, drill a hole at the top and bottom of the circle. Then Saw wood between the holes jigsaw. Use a hammer and chisel to remove the core logs.
Saw jigsaw notches.
Make a wooden circle the diameter of the logs and the roof of a larger size. It is possible to saw timber of either form of planks that need to fasten screws. Saw a small semi-circle and attach it under the tap-hole. If there birdhouse slot enclosure, apply them with a special tool.
Homes of logs can also be an original issue:
see also🧐
- 13 things that you can give a second life in the country
- 9 ways to make a hammock with his hands
- 5 incredibly simple way to do BBQ with their hands
- 10 ways to make a beautiful gift box with his hands
- How to make a garden path with his hands: 70 inspiring photos + instructions