How to take your measurements to clothes sat well

If you want to sew your blouse sitting perfectly and dress commissioned a seamstress, no fees, you need to take your measurements correctly. Good shot sizes make it easy to build patterns, reduce the number of fittings and fixes.

How to take measurements: general rules

• Measurements to construct a pattern dresses, skirts or pants you need to shoot for underwear. Put on fitting the clothes, which are going to wear the product. This is important because the different shapes braFor example, can change the height and girth.
• All measurements are carried out on the most developed part of the body. In right-handers measurements is removed on the right side, left-handed - on the left.
• When removing the yardsticks have to stand up straight without tension, in the usual position of the body. Qualitatively take your measurements with yourself is quite difficult. If you change the position of the body and change its size. A possible way out: take a product that sits very well on you, and remove it from the measurements.
instagram viewer
• Designate the natural level of the waist elastic band or a thin cord - it will facilitate the task.
• Since the human body is symmetrical, usually pattern constructed only to the middle of the figure. For convenience of the measurements recorded at half the rate. These standards include poluobhvat neck, chest, waist and hips, back width, the width and center of the chest. Other dimensions are recorded and fully utilized.
• In different countries, the system of construction of patterns and ways of removal of measures differ slightly. And depending on the school name may vary yardsticks and within countries. If you are unsure about what size in question, read the description. So you can quickly find a match.

Key measurement figures

Measurements for garments

These measurements will be needed if you want to sew a dress, blouse, jacket, coat.

1-10 measurements are recorded and used in half the amount, the rest - in its entirety.

1. Poluobhvat neck - measured on the base of the neck. Tape need to close in the jugular depression.
2. Poluobhvat breasts first - belt runs horizontally along the rear protruding points of the shoulder blades, the front - on the chest.
3. Poluobhvat second chest - behind the tape goes in the previous version, the front passes through the outermost points of the chest. The first and second breast poluobhvaty better to shoot one another, without changing the position of the tape on the back. Keep the natural posture, hands, lower down, but do not tighten belt in the armpits.
4. Poluobhvat chest third - tape passes around the body horizontally, front - on the most protruding breasts points behind - preserving the horizontal. This measurement corresponds to the size of mass production that suits you.
5. Poluobhvat waist - measured by the auxiliary tape or a rubber band, located at the narrowest part of the figure. Do not try to create your own waistline due to a tightening cord. You are beautiful, no matter the size, and the correct number will help the product is good to sit on the figure.
6. Poluobhvat hips - belt runs horizontally around the figure, in the back - on the most protruding buttocks points in front - considering abdominal protrusion.
7. The width of the chest first - measured horizontally between the front corners of the armpits, over the breast.
8. The width of the second chest - measuring tape is applied horizontally between the front corners of underarm through the most projecting point of the thoracic glands.
9. breast center - measured between the most prominent points chest. This size, as poluobhvat chest varies depending on the shape and density of bra you wear.
10. The width of the back - measured on the blades between the rear corners armpits.
11. waist length before - measured from the highest point of the shoulder seam at the alleged base of the neck to the waist in the front line. The tape is laid vertically on the figure. To find the highest point of the shoulder seam, wear thin knitted jersey. Where the shoulder seam rests on the neck, is the desired point. It can be found before the start of the measurement, note the fine, and remove the T-shirt.
12. breast height - distance from the highest point of the shoulder seam to the most projecting breast point.
13. waist length of back first - measured from the seventh cervical vertebra to the waist line. If you felt the base of the neck from behind, you will find prominent vertebra. They'll also need.
14. The length of the back waist second - measured from the highest point of the shoulder seam at the alleged base of the neck to the waist from behind. The tape is positioned vertically, repeating bends figures.
15. The height of the back armhole - distance from the highest point of the shoulder seam to the imaginary horizontal line drawn from the rear corner of the axilla.
16. Shoulder height oblique - measured from the end point of the shoulder to the point of intersection of the spine to the waistline. The final point of the shoulder can be found with the help of thin knitted shirts with sleeves. The place where the shoulder seam enters pritachivaniya sleeve seam - you need us to point. Since the waist you have designated a rubber band or tape, find the intersection of waist and spine should be easy.
17. shoulder width - distance from the highest point of the shoulder seam at the neck base to a final point of the shoulder.
18. The length of the sleeve - measured from the shoulder point to the final desired length. The hand should be in a natural position, slightly bent at the elbow.
19. girth shoulder - belt runs horizontally at the widest point of the shoulder.
20. wrist girth - measured on a brush on the protruding bones.
21. Length of the product - measured from the seventh cervical vertebra to the desired length.

Measurements for the skirt

The number of necessary yardsticks for the skirt depends on its silhouette. To skirt the sun only need the length of the product and poluobhvat waist. To sew a pencil skirt, you need to measure more poluobhvat hips. Skirt length is measured from the waist on the side seam to the desired level.

Measurements for trousers

Besides poluobhvatov waist and hips, to build pants take several yardsticks.

1. seat height - measured at the seated figure from the waist on the side seam to the chair. For accurate measurements of the seating surface should be hard.
2. The height of the knee - measured by standing waist line on the side seam to the middle of the kneecap.
3. The width of the knee - it is particularly important for tight trousers. The tape is folded around the knee.
4. The width of the trouser bottom - selected according to the model. If you are going to sew tight trousers, the width of the trousers at the bottom will be equal to the circumference of the foot through the heel.
5. Length trousers - measured by standing waist line on the side seam to the desired length. In narrow pants length is taken to bone. In medium or wide - to the middle of the heel, which you will wear these pants.

When you create the pattern you need to remember that measurements taken with the figure, do not equal the size of the details. When a drawing is added to increase the standards of freedom of fit. It is not a constant. It depends on the size of the figures, the fabric properties, purpose and silhouette products, as well as fashion.