9 ways to make a hammock with his hands
Do It Yourself Educational Program / / December 19, 2019
The easiest hammock on ropes
This hammock can be made of the usual cheap lining fabric, canvas, linen, cotton, burlap - yes of anything. It looks simple, but it is going in just a matter of minutes.
What do you need
- rectangular piece of fabric (about 3 × 1,5 m or less);
- 2 thick strong rope length of 3-4 m.
How to do
Fold the fabric in half lengthwise, fold the edge of the accordion and make it a little loop. Insert it in the rope and tie knots, as shown in the video. Similarly, a second tie the rope to the other edge of the fabric.
It is possible to first prepare a hammock, which will be tied rope, or first to tie the rope to the support, and then - to the hammock. The assembly described below is suitable for both methods. Simply select the more convenient for you.
Wrap the rope around the tree, pole, or other support. On the long end of the rope, which tied the hammock, make a small loop. Insert it in the same direction and tighten the rope. The resulting loop thread the other end of the rope and tighten again.
17 things that can be reused →
Hammock on the ropes and carabiners without sewing
Carbines make construction more convenient and mobile.
What do you need
- 2 carbine;
- 2 thick strong rope length 0.5 m;
- rectangular piece of fabric (about 3 × 1,5 m or less);
- 2 thick strong rope length of 3-4 m 2 or clamping the belt 1-1.5 m in length with loops at the ends.
How to do
Fasten carabiner to the middle of a short rope. Fold the fabric in half lengthwise, fold the edge of the accordion and make it a little loop. Insert into it clipped carabiner and tie a knot, as shown in the video. In the same way tie carbine to the other end of the fabric.
Attach a carabiner can be a rope or tensioning straps.
Tie a rope to the support in the same way as in the previous method. Thread the long end of the rope and pull in a carabiner. Wrap the elongated portion around a tight rope four times and tie a knot, as shown in the video.
Plus, this site is that it allows you to adjust the height of the hammock. Knot free rides on the rope, but tension remains stationary.
If you use the strap, wrap it around a support, Thread the one end of the belt into a loop at the other end and tighten. Fasten carabiner to the loop on the long side of the belt.
5 incredibly simple way to do BBQ with your hands →
Hammock of stitched fabric on ropes
Simple option for those who do not want to mess around with knots.
What do you need
- rectangular piece of fabric (about 2 × 1 m or more);
- thread;
- needle or sewing machine;
- 2 thick strong rope length of 4-5 m.
How to do
Fold the fabric on both narrow sides of 10-15 cm and sew. If possible, it is better to use a sewing machine. The joints must be very strong.
The resulting loop thread the rope and pull the fabric in the middle. Then, tie the rope to supports strong nodes.
5 simple units that can be useful to you →
Hammock of stitched fabric on the ropes and rails
Concise, comfortable and fairly simple by design.
What do you need
- rectangular piece of fabric (approximately 2,5 × 1 m or more);
- thread;
- needle or sewing machine;
- scissors;
- 32-36 large eyelets;
- drill;
- 2 wood slats on fabric width for a hammock;
- 2 metal ring;
- 2 durable ropes 10-15 m;
- 2 carbine - optional;
- 2 strong rope length of 3-4 m 2 or clamping the belt 1-1.5 m in length with loops at the ends.
How to do
Fold the fabric on both narrow sides of 5-10 cm and sew by hand or on a typewriter. Do these rims holes of eyelets at the same distance and secure them in the fabric.
Using a drill or other tool to make holes on the rails the same distance as between the eyelets.
Thread the rope to the metal ring and leave the end of 30-40 cm. The long end thread into the first hole in the rail, and then - in the outer side of the grommet. On the reverse side of the hammock rope thread the grommet in the following, in the rail and over the metallic ring.
Of the grommet can thread the rope in the same opening on the rail, through which it passes in front of it. Such a method will provide a more robust mounting. But you need to take a longer rope and do a wider opening in the rail.
The remaining ends of the rope to tighten the ring strong nodes. Make the same construction at the other end of the hammock.
By the metal rings and hooks can be attached to supports hang hammock, as shown in the previous methods. It can also be threaded through a ring other strong rope and tie them to the supports.
7 things you should not throw away →
Hammock of stitched fabric on rails and ropes with macrame elements
This embodiment is more difficult, but would present a hammock decoration garden plot.
What do you need
- rectangular piece of fabric (about 2 × 1 m);
- 30 is not too thick verovochek length of 50 cm - optional;
- stationery pins - optional;
- thread;
- needle or sewing machine;
- 14 Beads - optional;
- scissors;
- 2 wood slats on fabric width for a hammock;
- Small nail 24;
- hammer;
- 2 metal ring;
- 2 strong rope length of 15 m;
- 2 carbine;
- 2 clamping belt 1-1.5 m with loops at the ends.
How to do
Pre hammock can be decorated, if you want to make it look more interesting. Fold long edges of the fabric for a couple of centimeters, vertically put Cords at the same distance and fasten with pins for reliability. Then sew the fabric together with a rope and weave pattern of them, as shown in the video. Beauty can add beads.
On the narrow sides of the fabric make cuts a length of 5 cm at a distance of about 8 cm apart. In the middle of each rail nail 12 nails at a distance of 3-4 cm. Put ring 60 cm from the rail, pass it and the rope weave pattern, as shown in the video.
You will get two pieces of the rings and ropes. To attach them to the hammock, pass each loop of the rope under the incisions on the narrow sides of the fabric. Fold them, fasten with pins and sew. Then hang a hammock using rifles and belts.
How to make a garden path with his hands: 70 inspiring photos + manual →
Hammock in the macrame technique
Wicker elements can not only beautify the product and give it strength, but also to make them from scratch hammock.
What do you need
- drill;
- Two wooden slats 1 m in length;
- 10 braided cord length of 9-10 m;
- 2 metal ring;
- 2 carbine - optional;
- 2 clamping belt 1-1.5 m with loops at the ends of two strong ropes or 3-4 m.
How to do
Using a drill or other tool to perform each rail 20 holes equidistant from each other.
Take one cord, fold in half, in the Thread the ring and tie a knot. In the same way tie to the ring all other cords.
For convenience, hang a ring on any hook. Thread each cord through the holes in the rail. The distance between the ring and the rack should be about 20 cm. Then weave pattern, as shown in the video.
At the end of the thread the cord through the holes of the second rack and attach the ring to the other. A hammock can bind via spring hooks, belts or ropes as the instructions for hammocks of tissue.
By the way, if you absolutely nothing to tie the hammock, you can make your own support. For example, a massive wooden rack resembling boat:
Or a simple support boards of the two:
15 beautiful perennials, flowering all summer →
Chair hammock made of fabric on a hoop
Perhaps the most unusual way to make a cozy place to relax. Hammock chair will not take up much space, so it can be hung not only in the garden, but even on the veranda or balcony.
What do you need
- sintepon;
- scissors;
- 1 metal hoop diameter of 95-100 cm;
- thread;
- 1 m long strip of fabric 3 and 20 cm wide;
- needle;
- writing pins;
- square piece of tissue (approximately 1.5 x 1.5 m);
- 4 the clamping strap length of approximately 3 m.
How to do
Cut several strips syntepon width of about 20 cm. It is necessary to ensure that in the hammock was comfortable to sit on. Sintepon wrap around the hoop and tie thread.
Then wrap the fabric strip around the hoop and sew so that was not visible syntepon. For convenience, fasten the fabric pins.
Put large hoop to the middle piece of cloth and cut a circle whose diameter must be 20-25 cm larger than the diameter of the hoop. Cut fabric preform small symmetrical recesses with four sides. They are needed in order to have a place for hanging the hammock.
The hoop must be positioned exactly in the center of the circle of fabric. Gently pull it under the wrap, fold and sew very strongly to the hoop.
In those places where there were notches on the tissue will be visible hoop. Insert into the hole and sew the strap so as to form a loop around the hoop. Likewise sew three more belts.
Tie straps to the supports so that the hammock hung obliquely.
8 things you can give a second life in the country →
Chair hammock made of fabric on rails
This chair will appeal to both adults and children.
What do you need
- drill;
- 3 thick wooden slats length of about 80 cm;
- 2 thin wooden slats length of about 90 cm;
- nails or screws;
- hammer or screwdriver;
- rectangular piece of cloth (the dimensions will be discussed in the description);
- thread;
- needle or sewing machine;
- 2 thick strong rope length of about 1.5 m;
- 3 thick strong rope length of about 2.5 m.
How to do
With the help of a drill, perform two holes thick rails on both sides at a distance of approximately 9 cm from the ends of the rails. The diameter of the holes must be such that they can be inserted into thin slats.
After 5 cm from these openings proceed more one hole slightly smaller diameter. There will be inserted rope. Insert the thin slats in a wide hole in the thick rails and fasten with nails or screws.
By width of the fabric must fit between small apertures for pitches, and its length must be greater than the length of the prepared wooden structure. First, the fabric will need to turn in, and secondly, it should be a little slack, so that the chair can be seated.
Wrap the fabric around the narrow side of thick strips and sew by hand or on a typewriter. The free opening of the upper rail hammock insert the short rope and tie each of them lasting assembly around the rail. In the same way tie two long ropes to the bottom rail.
Then tie all four ropes to the third rail thick. Do it more on the two holes for the rope, insert it, tie and hang the chair for some hook or a thick branch.
How to make a beautiful flower bed with his hands: 55 inspiring photos + manual →
Chair hammock on the rails in the technique of macrame
This hammock looks spectacular, but it will leave a lot of manufacturing the cord.
What do you need
- drill;
- 3 thick wooden slats length of about 80 cm;
- 2 thin wooden slats length of about 90 cm;
- nails or screws;
- hammer or screwdriver;
- 2 thick strong rope length of about 1.5 m;
- 3 thick strong rope length of about 2.5 m.
- 16 braided cord length 8-9 m.
How to do
Do exactly the same wooden frame, as well as for the chair-hammock fabric. You can immediately attach it to the ropes and connected with the third rail, to which is suspended from the frame. This, too, is the same as in the previous method.
But the seat itself is woven of cords. Fold each in half and attach to the top rail of the hammock (if you are directly connected with the construction of a third rail, it is necessary you will rake in the middle). Then the chair can be woven as well as a conventional hammock configured in macrame art. But it can do more than the original pattern.
When you tie all cords to the rail, you will have 32 hanging down the cord. Take four of them and slide under the first cord last.
Get the latest cord under the two middle and pass into the loop. To complete the unit, repeat the same steps again. Then, in the same way make the components of the remaining cords.
In the second row, and all of the even rows repeat unit from the third column from the beginning, and in odd rows - with the first cord.
All the hammock will be composed of the same components, which alternate with each other in a staggered manner. Here is a weave:
To bind the basis for the hammock to the bottom rail, wrap the cord around it and tie four strong knot.
Hammock suspended in the same way as the previous one.
15 beautiful annuals that bloom all summer →