7 cool craft pumpkin for autumn comfort
Do It Yourself Educational Program / / December 19, 2019
Seven detailed instructions and plenty of ideas for inspiration to help you create the coach houses, a bouquet, a unicorn and not only.
How to make a unicorn pumpkin
What do you need
- Small pumpkin;
- white acrylic paint;
- broad brush;
- cardboard;
- scissors;
- Scotch;
- golden duct tape;
- a pencil;
- white felt;
- lilac felt;
- black pen;
- black self-adhesive paper;
- pink adhesive paper;
- glue gun;
- pink yarn;
- little artificial flowers;
- PVA glue;
- rhinestones.
How to do
1. The authors of the master class is used a decorative pumpkin. But, of course, come up and present. Just paint it white and leave to dry. And if the color shows through natural vegetable, apply several layers of paint.
2. Cut out cardboard triangular shape with a rounded side. Fold it so as to obtain the cone and secure with tape. Scissors and then align the bottom of the figure - it will be an animal horn.
3. Obkleyte horn golden ribbon.
4. Draw a white felt two teardrop-shaped ear. They need to be sharpened at the top and slightly extended downward. Cut them out.
5. Circle one ear on the purple felt and cut out the same shape, only smaller. Circle it, and cut out a second piece.
6. Draw on the cardboard marker closed eye with long eyelashes. Then cut it out along the contour. Circle the back of the black self-adhesive paper, turn the piece and drag again. The details are in the video. Cut drawn piece.
7. On pink paper, draw and cut out two circles - it will be a unicorn cheeks.
8. With the help of glue-gun, attach the horn, closing them pumpkin stem. Glue the white and purple details ears, walk glue on the bottom edges and attach them to the left and right of the horn.
9. Make mane. To do this, wrap the yarn several times around a notebook, a thin book or something like that. Remove the skin, cut them at one end and tie on top. Glue the mane of the horn so that it fell down on one side.
10. Front around the horn and ear paste flowers. Below, attach the eye, and even lower, right and left of them - cheeks.
11. With PVAc glue pastes for seredinke colors. Add more underneath a row of rhinestones.
What other options are there
Here is a similar, but slightly different design pumpkin:
But the charming little multi-colored fluffy unicorns with bangs:
Picture a magical beast on paper🦄
- 5 ways to draw a fairy unicorns
How to make a bouquet in a pumpkin
What do you need
- Pumpkin;
- Floral Foam;
- highlighter;
- knife;
- fresh flowers and herbs;
- pruner.
How to do
1. Attach to the top of the pumpkin floral sponge and outline the marker.
2. Soak the sponge. Cut the pumpkin on the contour and remove top and the extra flesh.
3. Put into a wet sponge. Crop shears tips of flowers and greenery, so they were not too long. Begin to stick the stems into the foam.
4. Gather composition by sticking all the flowers and herbs.
What other options are there
High bouquet of flowers:
Look how cute it looks a bouquet in a small pumpkin. Flowers have trimmed very short:
But the composition of fruit, berries and autumn leaves:
Create another unusual bouquet💐
- How to make an original bouquet of fruit with their hands
How to make a candlestick or a lamp from a pumpkin
What do you need
- Pumpkin;
- knife;
- measuring tape;
- highlighter;
- drill;
- candles.
How to do
1. Cut off from the top of the pumpkin, but do not throw out. Remove from the vegetable seeds and excess pulp. Vertically attach the tape to the pumpkin and make a mark at a distance of a little more than 1 cm.
2. Thin drill make a hole in each of the second mark.
3. Thicker drill walk around the remaining marks. You will get a drawing:
4. Repeat the pattern across the pumpkin so that the horizontal rows of alternating small and large opening. Put a candle inside and cover the tip.
What other options are there
Here's how to make a pumpkin on a floral pattern:
Inside this lamp garland inserted:
Children will appreciate the fairy candle holder with the shape of the fairy Tinker Bell cartoon "Peter Pan":
Through this template we could have done such a nice candle holder. In the darkness, the silhouette will be visible to all the cake:
But incredibly beautiful candlestick in the form of a skull. In case you want to prepare for decor Halloween.
Make Your Own Lamp💡
- 15 ways to make a chandelier designer with his own hands
How to make a house out of pumpkin
What do you need
- Several thick branches;
- secateurs, knife or other tool for cutting;
- pumpkin;
- glue gun;
- white acrylic paint;
- thin brush;
- gray acrylic paint;
- the self-hardening polymer clay;
- rolling pin;
- Two wooden sticks;
- awl;
- red acrylic paint;
- decorative moss;
- stand;
- different decor.
How to do
1. Cut the branches: you need a lot of the same pieces and some pieces more.
2. Adhere to the pumpkin four branches so as to obtain a window. The upper and lower should be slightly longer than the lateral.
3. Of long sticks to make a door. Side add exactly the same window as in the previous step.
4. Paint the inside of the windows with white paint. When it dries, walk on top of a gray shade. Dim upper portion of additional strokes.
5. Roll the clay into a thick rectangle the size of the door. Prilep her inside, remove the excess and make a vertical pattern of a special tool, a conventional stick or something else.
6. Fold several identical short branches. To hold them together, glue them wooden sticks. On the one hand they must have pointy ends that can be inserted into a pumpkin. This will be the stairs.
7. On the reverse side of the stairs vertically affix the sides of the two short branches. Top horizontally, attach a long stick.
8. Add a railing on the other side. Do the two holes under the door and insert the ladder. For reliability can be coated with adhesive.
9. In the windows, draw the curtains white with red polka dots. Zadekoriruyte their moss.
10. On the door make a small wooden stick. Of twigs make two simple fence. Adhere to the pumpkin stand, it Cover the moss, attach the fence and other decorative elements.
What other options are there
Door and windows can be cut out and removed from the pulp of the pumpkin. Then it will be possible to put into something.
Here are some great ideas for inspiration:
Try👍
- 10 amazing ways to cook the pumpkin in the oven
How to make a fairy fall pumpkin
What do you need
- 2 white chenille-wire;
- small pumpkin;
- glue gun;
- artificial autumn leaves;
- markers;
- cotton or foam bead;
- thin twigs;
- acorns - optional.
How to do
1. Twist the ends of the wire so as to obtain a long wire.
2. Wrap it around the pumpkin stem, twist the front and bend the ends in opposite directions.
3. Glue to the top of the stem a couple of artificial leaves.
4. Draw on the ball face and stick it on the leaves.
5. Obkleyte head leaf.
6. Glue the two leaf sprigs. Screw the ends of the wire around the branches. Instead leaves to them you can stick acorns.
Gather the whole family around the table😋
- 10 Pumpkin soup with bright color, taste and aroma
How to make a penguin pumpkin
What do you need
- Small pumpkin;
- white acrylic paint;
- broad brush;
- black spray paint;
- very small pumpkin;
- gold spray paint;
- glue gun or other strong glue;
- black openwork;
- several silver buttons;
- 2 cotton pads;
- scissors;
- shiny gold fabric;
- black cloth;
- orange fabric.
- 6-black chenille wires.
How to do
1. Paint a small part of the pumpkin white and dry.
2. Cover the white part of the paper and paint the rest of the surface of black paint.
3. Tykovku little dye in the color gold. When both the pumpkin dry, glue the small to the big top. The fabric is made of openwork butterfly and glue it between them on the white part. Attach the bottom row of buttons.
4. To each cotton disc glue on one gold circles of smaller diameter. Attach the top of an even smaller circle of black fabric. Glue the eyes resulting in the head, and add the orange triangular beak between them.
5. Twist the single wire into a loop. Screw it two more wire loops so as to obtain the figure, as in the photo. The video above shows the entire process. Make another the same piece and glue the two sides of a large pumpkin.
Bookmark🥧
- 10 bright casserole of pumpkin with cheese, semolina, apples, chicken and not only
How to make pumpkin carriage
What do you need
- Wire;
- the self-hardening polymer clay;
- PVA glue;
- water;
- newspaper or paper;
- Two wooden sticks;
- gold spray paint;
- glue gun;
- pumpkin;
- knife;
- gold bulk paint;
- gold ribbon.
How to do
1. Shape the wire four-wheel drive. Two of them should be a little less than the others. In the middle of lock wire clay.
2. Stuck to the wheels with clay.
3. Dilute the glue and water in approximately equal proportions. Obkleyte wheels paper or paper dipped in the adhesive sheets mixture.
4. When the wheels are completely dry, paint them and stick to a golden color. Glue sticks to the wheels.
5. The author uses a white pumpkin. Ordinary ginger can be left as is or painted. Cut off the top of the pumpkin and remove the pulp. Make windows, as shown in the photo. Walk around the edges of bulk paint.
6. Garnish with pumpkin and ribbons from bulk ink patterns. Glue on the sides of the wheels.
What other options are there
The wheels can be made from small pumpkins, pumpkin itself painted in blue, gold or other colors, and window and door draw. Here are a few ideas that will help you in creating your own coach:
see also✨🎀🎃
- 15 ways to make the house comfortable for the cat with his own hands
- 15 ways to make a bird feeder with their hands
- 20 ways to make a cool birthday card
- 10 ways to make a beautiful gift box with his hands
- How to cut a pumpkin for Halloween