How to open a lock without a key

Every city has a service of emergency opening of locks, ready to help anyone with the door closed, lost or broken keys. Find such masters can, by typing in a search engine "open the door to the city."

As a rule, experts of these companies to quickly react to and cope with any locks. If necessary, you can immediately repair or replace the lock and make a duplicate key. masters services costing a pretty penny, but you will save up nerves.

If the lock is not very difficult and you are confident in their abilities, you can try to open it yourself. There are options for both the mechanism of injury, or without. Not help one - you can always try another.

How to get a key, if it broke in the lock

This happens usually with worn cylinder locks. Well there is a narrow and flat key, so if you overdo it in the fight against the jammed mechanism will only get worse.

The first is to try to open the door the remainder of the key. To do this, you need to drown it all the way into the slot, and then insert a nail file or other thin object and try to crank it up, opening the lock.

If the key is broken, so that part of it sticking out of the hole, you're in luck. Chip is quite easy to get with a pair of pliers or a similar tool. Borrow it from neighbors and gently pull the remains key, well holding the outside protruding part.

You can also try to turn the key and open the lock.

It did not work? Well, then you have to get a saw for jigsaw. It must be inserted into the keyhole on the side of the key, giving the teeth.

When the nail file will go down into the slot until it stops, turn it 90 degrees to pick up the key, and try to get it.

Another option - to remove the remains key, sticking to it broken part. carefully apply Super glue to the breaking point and connect the two parts.

Wait for a while until the glue dries, and try to slowly get the key from the hole.

How to open the padlock without a key

This is the most common and, usuallyPrimitive castle, consisting of a body with a bow and larvae with pin mechanism inside. Open it without a key, you can easily.

Method 1. Passepartout tin

1. Cut out any tin letter "T" with big shoulders.
2. Insert the master key into the gap between the lock body and shackle.
3. Fold the long ends of the master keys together and crank them to release the locking tab.
4. Pull the handle of the lock and open.

Method 2. Passepartout of staples

1. Take two paper clips and bend them as shown in the video.
2. Insert a paper clip into the first lock hole and rotate it slightly to create tension.
3. The second clip try to press the pins inside.
4. Operate both clips at the same time as the lock will not open.

Method 3. Spanners

1. Take two wrenches more.
2. Insert them into the arch and Abut each other.
3. Push the keys until the bow or the lock body will not break.

How to open the cylinder lock without a key

Such locks are locked by means of pins, assembled in a single unit - larva. It has a rotating core with a number of spring-loaded rods, cut into two parts.

When there is no key in the hole or it is incorrect, the pins are part of the core and lock it. The key to the correct profile raises the pins to such a height that the upper body is hidden in the larvae, and the bottom - in the heart, allowing it to freely rotate and open the lock.

It turns out, you have to sink all the pins to make the core of the larvae, and then turn it. For machines with several turns of the procedure have to be repeated.

Method 1. Passepartout of studs

1. Bend of the pins or wire L-shaped lever, and from the other studs make a master key with a bent tip.
2. Insert the lever into the hole and try to rotate with minimal effort.
3. At the same time, the pick iterate over the pins, one by one by clicking on them.
4. When the pins find their place, the core provernotsya.
5. Repeat the previous steps on each revolution, until the lock opens.

Method 2. Passepartout from a plastic card

1. bend mapSlightly rounded it, and insert it into the crack between the door and door frame.
2. Moving improvised master key in the lock area, try to push it deeper.
3. As soon as the tongue moves the mechanism, the door will open.

Method 3. drilling pins

1. Mark the place for drilling a center punch just below the core larvae.
2. Drill drill housing larvae, destroying blocking rotation pins.
3. Gently tap the larva of a hammer or other object.
4. Turn the core with a screwdriver or another key to open the door.

How to open a lock without a key lever

At the heart of the lock mechanism is a set of levers - special plates with shaped slits. At the correct key tabs on the beard coincide with these cuts. When rotating the key levers are raised to the desired height, forming a track, along which moves a locking pin.

To open the lever lock, you need to pick up all the plates, arrange them in the right way and move the bolt. It sounds easy, but in reality it is much more difficult. Especially for those who do it for the first time.

Method 1. Passepartout of spokes

1. Bend of the spokes or hard wire master key with a curved tip.
2. Insert any other similar key and rotate it slightly, creating tension.
3. Wiggle the pick, trying to raise the levers, and at the same time try to turn the key.
4. When all the plates will be raised, the lock will give in.
5. Repeat for the next turn with a spanner until the door opens.

Method 2. Drilling the bolt shank

1. Find online your castle scheme and find out the exact location of the bolt fastening.
2. Note desired position and drill the drill diameter of 10-12 mm through the lock housing.
3. Insert a screwdriver in the hole or use a cut down key to move the latch and open the door.

How to open a door phone without a key

The easiest way to get to the entrance - to call in one of the apartments and asked to open the door. If this is not your option, act differently.

Try intercom service menu from which you can give the command to open the door. Entrance to this menu by using a special combination. Individually for each doorphone model naturally.

However, to find the right team on the internet is not difficult. Enough to drive in search for "intercoms Codes" to enter the desired character, and the door will open.